Eurocase UPS EA610 1000VA Pure Sine Wawe

The Eurocase UPS EA610 1000VA Pure Sine Wave backup power supply for the UPS EA610 uses the line-interactive principle and delivers an output voltage with a pure sine wave. It provides an apparent power of 1000VA and a real power of 800W, which is more than enough for workstations, smaller servers, and network components. The integrated automatic voltage regulation (AVR) stabilises the input voltage without needing to switch to the battery, extending its lifespan. A pure sine wave output is essential for powering sensitive electronics, devices with motors, or switched-mode power supplies with active PFC. The clear UPS with an LCD display shows key operational information, such as input and output voltage, load, or battery status. This Pure Sine Wave backup power supply provides reliable protection and a clear overview of your power supply.

Performance and software

The line-interactive topology uses automatic voltage regulation (AVR) to stabilise the output voltage without switching to the battery during normal mains fluctuations. The efficiency of the power supply at half and full load is 80%. The real power of the Eurocase UPS EA610 Pure Sine Wave backup power supply is 800W with an apparent power of 1000VA. The backup time at full load is 120 minutes. The power supply uses a USB port to communicate with a computer. The package includes communication software for MS Windows operating systems. The tool provides detailed monitoring of the UPS status. The software monitors operating conditions and configures an automatic safe system shutdown during a prolonged power outage. This allows the user to monitor input and output voltage, frequency, current load in watts, internal temperature, and the exact battery charge level as a percentage.

Battery and connectors

Inside the Eurocase UPS EA610 backup power supply are two 12V lead-acid batteries with a capacity of 7Ah. Charging time to 90% of nominal capacity is approximately 8 hours. The cold start function starts the power supply directly from the batteries, even without an input power supply. Surge protection and RJ-45 data network protection safeguard connected electronics from voltage spikes. The power supply connects to the mains using an integrated cable with a type E plug (CEE 7/5). For powering appliances, it offers two type E sockets and one IEC C13 standard socket. All output sockets are fully backed up and surge protected. A pair of RJ-45 ports filters surges on the data line, protecting connected network cards, switches, or routers.