FABER IN-LIGHT EV8 WH MATT A70

Perfectly quiet cooker hood operation without loss of function

The cooker hood can also be connected to a VILPE external roof ventilation unit, which is available in several colours, or to a MISTRAL external facade motor. The technical parameters of the cooker hood are then identical to the parameters of the selected external ventilation unit. In both cases, all functions of the hood are retained and its operation becomes silent. Air is drawn in through a slot around the perimeter of the panel covering the filters. The concentrated air stream flows much faster and has the ability to draw in vapours from the wider area around the extraction zone. You will particularly appreciate perimeter extraction for fully integrated hoods, which never completely cover the cooking zone with their dimensions. 

Experience the power of intensive extraction

The extractor hood boasts an above-standard number of functions. It is equipped with intensive extraction, a filter saturation indicator, a delayed switch-off option and a "24" ventilation function that ensures all-day ventilation of your kitchen. You can conveniently control all functions with the remote control, which is included as standard, or with low-profile buttons. The cooker hood can be wirelessly connected via radio signal to a FABER induction hob. In this case, you can control it directly from the hob's control panel – the extraction power is automatically optimised according to the selected cooking level (K-LINK). Perfect illumination of the work surface is ensured by an attractive perimeter LED strip with a pleasant light intensity and very low consumption.

Activate maximum extraction in a second

Faber extractors with electronic controls can be used with a remote control, which increases user comfort. Radio or infrared technology (depending on the hood type) allows you to remotely control all functions, such as switching the motor and lights on and off or adjusting the power level. The function automatically switches the extractor off 30 minutes after cooking has finished for a complete air exchange in the kitchen and the removal of all residual steam. The motor can be located externally, outside the kitchen. This results in almost silent operation. The increased extractor power can be activated by pressing a button from any speed. It is intended for short-term use. After 10 minutes, the appliance automatically switches back to the speed from which the function was activated.

Have perfect light over your hob

With the K-Link function, you can activate automatic control of the hood's power by touching the hob's panel while food is heating. When cooking is finished, the hood automatically switches to silent mode and continues to run for a few more minutes to eliminate residual steam and odours. The LED lighting creates a strong and sharp light source by combining excellent light distribution on the cooking zone with a pleasant, relaxing intensity. At the same time, energy consumption is very low, at just 2W. The function alerts you to the need to maintain (wash) the grease filters, or to the need to replace the odour filters (only in recirculation mode). Air is drawn in through a narrowed profile around the perimeter of the extraction zone. This significantly increases its flow speed and ability to draw in surrounding vapours (Venturi effect). The panel covering the extraction zone prevents noise from the ventilation unit from travelling back into the kitchen, reducing perceived noise by 25%.

Higher efficiency thanks to the EVO diffuser

The Ventilation 24 function provides light ventilation of the kitchen or connected spaces 24 hours a day. The extractor automatically switches on every hour for 10 minutes and operates with minimal noise and negligible consumption. FABER extractors consume less, reduce emissions and deliver excellent performance thanks to the new EVO diffuser. Thanks to the new Sound Pro technology, turbulence and air vortices in the motor area have been reduced. This has successfully reduced noise and improved the sound quality of the cooker hood.

Technical specification:
Energy class: A
Performance according to IEC 61591: 260 | 390 | 560 | INT 710m³/h
Noise level according to IEC 60704-2-13: 54 | 58 | 64 | INT 69dB(A)
Maximum outlet pressure: 560Pa
Outlet flange: 150mm
Finish: matt white
Lighting: perimeter LED 4000K
Controls: low-profile buttons / remote / from hob
Annual consumption: 55kWh
Weight with box: 13.8kg