FABER IN-NOVA PREMIUM WH MATT A60

Professional ventilation with the REMOTE BLOWER system

A unique feature is the option to adapt the hood for direct connection to a heat recovery system. In this case, the extractor is supplied without a motor and is equipped with an additional grease filter to capture the finest grease particles. FABER has been the only manufacturer on the market to offer this solution for 10 years! Another interesting option is to move the cooker hood motor outside the kitchen. The REMOTE BLOWER system lets you convert the hood into a motorless one and use the original motor to create an external EVJ ventilation unit, which can be placed in a pantry, utility room or loft. It can also be connected to a VILPE external roof ventilation unit, available in several colours, or to the MISTRAL external motor for façade mounting.

Check the filters with the handy saturation indicator

The technical parameters of the hood are then identical to those of the selected external ventilation unit. In all these cases, all the hood's functions are retained, operation becomes silent, and with a direct connection to a heat recovery system, the house can be certified as passive. The IN-NOVA PREMIUM cooker hood is equipped with a special SELF-START sensor that activates it as soon as the air temperature reaches 35°C. If the sensor detects that the set temperature limit has been exceeded, the hood switches to the second speed level to ensure optimal kitchen ventilation. The extractor offers three speed levels, an intensive extraction function and a filter saturation indicator. You can control all functions with low-profile buttons. It can also be operated with a remote control, which can be purchased as an optional accessory. Perfect illumination of the work surface is provided by two LED bulbs with a pleasant intensity and very low consumption.

Self Start, remote control and external motor

A special sensor switches the cooker hood on as soon as the air temperature reaches 35°C. The intelligent sensor automatically activates the hood whenever it's needed. Please note: The 35°C temperature required for automatic start-up may not be reached with induction hobs. Faber extractors with electronic controls can be used with a remote control for greater user convenience. Radio or infrared technology (depending on the hood type) lets you remotely control all functions, such as switching the motor and lights on or off, or setting the power level. For hoods marked with the External Motor icon, the motor can be located externally, outside the kitchen. This results in almost silent operation.

Intensive extraction and LED lighting

The increased extractor power can be activated by pressing the key from any speed. It is intended for short-term use. After 10 minutes, the appliance automatically switches back to the speed from which the function was activated. LED lighting creates a strong, crisp light source by combining excellent light distribution on the hob with a pleasant, relaxing intensity. Energy consumption is very low, just 2W. The function alerts you when it's time to maintain (wash) the grease filters or replace the odour filters (recirculation mode only). Air is drawn in through a narrowed profile around the perimeter of the suction zone. This significantly increases its flow speed and ability to draw in surrounding vapours (Venturi effect). The panel covering the suction zone prevents noise from the ventilation unit from escaping back into the kitchen, reducing perceived noise by 25%.

Sound Pro and heat recovery

Thanks to new technology, the turbulence and air vortices that occur in the motor area have been reduced. This has reduced noise and improved the sound quality of the cooker hood. A cooker hood connected to a heat recovery system prevents heat loss. In the winter months, heat recovery captures up to 90% of the heat that would otherwise be lost, meeting the conditions for certifying the house as passive. The system combines the advantages of ducted operation (air exchange) and recirculation operation (prevention of heat loss). The extractor is supplied motorless, with an additional filter that enables direct connection to a heat recovery system.

Technical specification:
Energy class: A
Performance according to IEC 61591: 250 | 390 | 570 | INT 670 m³/h
Noise level according to IEC 60704-2-13: 53 | 60 | 67 | INT 69 dB(A)
Maximum outlet pressure: 580 Pa
Outlet connection: 150/120mm
Finish: matt white
Weight with box: 10.5kg
Lighting: 2× LED 4000 K
Controls: low-profile buttons / sensor / remote
Annual consumption: 54kWh