
Don't like the alternatives?
Choose from the full offer
FABER TWEET EV8 BK A80
The unassuming and stylishly clean FABER TWEET EV8 BK A80 surprises with its high extraction power, reaching up to 700m³/h. The angled black glass panel does not get in the way while cooking and is easy to maintain. The high performance is reliably delivered by the modern EVO ventilation unit, which stands out for its low energy consumption. A unique feature is the option to adapt the hood for direct connection to a heat recovery system. In this case, the extractor hood is supplied without a motor and is equipped with an additional grease filter to capture the finest grease particles. Another interesting possibility is relocating the hood's motor outside the kitchen. The REMOTE BLOWER system lets you convert the hood into a motorless hood and, using the original motor, create an external EVJ ventilation unit that can be placed in a pantry, utility room, or the attic. It can also be connected to a VILPE external roof ventilation unit, which is available in several colours, or to a MISTRAL external motor on the façade. In these cases, the technical parameters of the hood are identical to those of the selected external ventilation unit. In all these scenarios, all the hood's functions are retained, operation becomes silent, and if directly connected to a heat recovery system, the house can be certified as passive.
Key features of the FABER TWEET EV8 BK A80 cooker hood
- Energy class B
- Touch controls and three speed settings
- Perimeter aspiration for effective capture of all vapours
- Intensive extraction function and delayed switch-off
- Chimney included (for recirculation mode, a recirculation kit and carbon filter must be ordered)
- High extraction power of 700m³/h
- Option to connect to a central duct
- Option to connect to a heat recovery system
- Hob-to-hood connectivity
- Black glass finish
Three speed settings
The hood features touch controls and offers three speed settings, an intensive extraction function, and a delayed switch-off after you finish cooking. The hob is illuminated by two LED bulbs with a light spectrum similar to daylight. A chimney is included in the package; for recirculation mode, a recirculation kit and a carbon filter need to be ordered.
Boosted extraction power
The delayed switch-off function allows the extractor to turn off automatically 30 minutes after you finish cooking, ensuring a complete air exchange in the kitchen and the removal of all residual vapours. The boosted extraction power can be activated by pressing a button from any speed. It is intended for short-term use. After 10 minutes, the appliance automatically switches back to the speed from which the function was activated.
Heat recovery
A hood connected to a heat recovery system prevents heat loss. In the winter months, the heat recovery system captures up to 90% of the heat that would otherwise be wasted, thus meeting the conditions for certifying a house as passive. The system combines the advantages of a ducted hood (air exchange) and a recirculation hood (prevention of heat loss). The extractor is supplied without a motor and with an additional filter that enables direct connection to the heat recovery system.
Perimeter aspiration
Air is drawn in through a narrowed profile around the perimeter of the suction area. This significantly increases the air's flow speed and its ability to pull in surrounding vapours (the Venturi effect). The panel covering the suction area prevents noise from the ventilation unit from travelling back into the kitchen, reducing perceived noise by 25%.
Width:
80cm
Appliance weight:
14.1kg
Performance according to IEC 61591:
300/460/610/INT 710m³/h
Noise level according to IEC 60704-2-13:
51/59/64/INT 67db(A)
Maximum output pressure:
529Pa
Outlet duct:
150/120mm
Lighting:
2× LED 4000K
Annual consumption:
74kWh
Specifications
Design
Kitchen hood energy parameters
Hood type
Hood functions and features
Hood performance
Range hood dimensions and weight
Hood outlets
Hood colour
| Code: | FABDG053 |
| Links: | Product Fiche |
| Manufacturer information |
Faber S.p.A., Viale XIII Luglio, 160, 600 44 Fabriano (AN), Italia, [email protected]
|