EVERCOOL Buffalo HPFA-1025EA

Executive radiator designed for AMD processors with paticemi socket 754, 939, 940 and AM2.HeatPipe Cooler has two tubes, which pay heat of the base into a passive cooler, where there is a rapid cooling using an active fan with dimensions of 100 x 100 mm.Cooling a strong current of air ensures fan with the performance of 1800 revolutions per minute.Fan can connect to the motherboard via the 3-pin power connector in 12.
HeatPipe technology is based on the principle of closed-tube, which in its "ohřívaném" the end is fluid with a low boiling point, which begins heating evaporate in gaseous form rising to the "chilled" the end where kondenzuje and after the walls of the tube is returned in liquid form back .When heating the liquid waste heat from the chip used to change the form and then in the form of hot steam goes to the other end, it is necessary to cool the temperature in the steam zkondenzuje.Unlike traditional convention offers the technologies HeatPipe higher efficiency of transmission of heat, but only provided a sufficient temperature difference between the two ends of the tube and its correct orientation.
The parameters and specifications:
Supported processors: AMD Athlon 64 / FX / 64 / X2 AMD Opteron AMD Opteron Dual-Core AMD Sempron
Supported slot:
Socket 754 / 939 / 940 / AM2
Speed:
Ot 1800./ min.
Noise:
<23 dB
HeatPipe:
The number of tubes:2
Diameter:6 mm
Shape:U
Power:
In 12
3 pin connector
Dimensions:
110 x 72 x 143 mm
Weight:
500 g