ANTHBOT Robotic Mower M5 Lidar
ANTHBOT Robotic Mower M5 Lidar
The ANTHBOT M5 LiDAR robotic lawnmower mows your lawn without boundary wires
A regularly maintained lawn is guaranteed with the ANTHBOT M5 LiDAR robotic lawnmower, which does not require the installation of boundary wires. After connecting to the mobile app, it creates a map of the garden by itself and, thanks to 360° LiDAR navigation, a pair of 3D cameras and advanced spatial recognition, it navigates precisely even on complex plots with trees, shrubs or narrow passages. The battery-powered operation allows free movement throughout the garden and is suitable for areas up to 600m².
Key Features of the ANTHBOT M5 Lidar Robotic Lawnmower
- Robotic lawnmower for plots up to 600m²
- Wireless installation without boundary wires
- 360° LiDAR navigation and two 3D cameras
- Recognition of more than 1,000 obstacles
- Mobile app in English
- Manages up to 20 mowing zones
- Virtual No-Go Zones
- Edge Trimming function for more precise edge cutting
- DropMow function starts mowing immediately
- Mowing height adjustable from 30 to 70mm
- Handles slopes up to 45% and obstacles up to 4cm high
- Automatic return to the charging station
- Rain sensor
- Connection via Bluetooth, Wi-Fi and 4G
- Quiet operation with a noise level of 58dB
Precise Orientation and Safe Operation
The reliable movement of the ANTHBOT M5 LiDAR robotic lawnmower is ensured by a combination of LiDAR radar, two wide-angle 3D cameras with a 150° view, and artificial intelligence. The system can recognise more than 1,000 obstacles including toys, garden furniture, pets or people and automatically adjusts its route. Safety is enhanced by a lift sensor, a tilt sensor, an emergency STOP button and PIN code protection against unauthorised use.
Handles Slopes and Complex Terrain
A brushless motor, large wheels with a deep tread and a floating cutting disc with five blades allow the ANTHBOT M5 LiDAR robotic lawnmower to work on sloping and uneven ground. It can handle slopes of up to 45%, overcome obstacles up to 4cm high, and thanks to its 20cm working width, it mows precisely around trees, kerbs and in narrower parts of the garden. The Edge Trimming function reduces the need for subsequent edge trimming, and the DropMow mode allows for immediate mowing to start after placing it on the lawn.
Smart Control and Automatic Care
The complete setup of the ANTHBOT M5 LiDAR robotic lawnmower is done in the clear mobile app, available in English. You can create up to 20 separate mowing zones with their own schedule and cutting height ranging from 30 to 70mm. It also features virtual No-Go zones to protect sensitive areas, connectivity via Bluetooth, Wi-Fi and 4G, and an automatic return to the charging station when the battery is low. The 2.5Ah Li-Ion battery provides up to 40 minutes of operation, recharges in about 60 minutes, and a rain sensor sends the mower back to the station in case of bad weather. In addition, its quiet operation at just 58dB allows for mowing even in the evening.
Technical Parameters
- Model: ANTHBOT M5 LiDAR
- Drive type: battery-powered
- Recommended area: up to 600m²
- Working width: 20cm
- Mowing height: 30–70mm
- Battery capacity: 2.5Ah Li-Ion
- Number of batteries: 1
- Operating time: up to 40 minutes
- Charging time: approximately 60 minutes
- Maximum slope: 45%
- Maximum obstacle height: 4cm
- Noise level: 58dB
- Navigation: 360° LiDAR + 2× 3D camera
- Chassis material: plastic
- Connectivity: Bluetooth, Wi-Fi, 4G
- Intended for: flat, sloping and complex plots
Package Contents
- ANTHBOT M5 LiDAR robotic lawnmower
- Charging station
- Power adapter
- Set of cutting blades
- Installation accessories
- User manual
Specifications
Navigation
Technical specification
Battery
Features
Security
Compatibility
Packaging
| Code: | ANThob002 |
| Warranty: | 24 months |
| Manufacturer information |
Jarabák s.r.o., Horova 347/2, 251 01 Říčany, Česká republika, [email protected], +420 313 037 477 |