BISON LIQUID RUBBER 50 ml

BISON LIQUID RUBBER is a high-quality, transparent paste for repairing, protecting and waterproofing thousands of different objects. It glues, seals and fills rubber, leather, textiles, neoprene, plastics, wood, metal and ceramics. It is especially suitable for repairing joints and holes in sports shoes, soles, boots, gloves, inflatables, boats, tents, wetsuits, raincoats, etc. It is not intended for PP, PE and Teflon. It is strong, waterproof (including against seawater), flexible and has a long life. It is resistant to chemicals, high temperatures and weathering. It has excellent thermal resistance from -40°C to +120°C. The bonded joint remains elastic and compensates for internal stresses.

Instructions for use:
Roughen the material. Surfaces must be clean, dry, and free of dust and grease. Apply a layer of at least 2mm and spread the paste. Repairing footwear/inflatable boats: apply a thin layer (max. 1mm) to the surface and press the polyester patch (min. width 2.5cm) firmly into the paste with a spatula. Spread a layer of paste over the polyester patch and the surrounding area. Curing time: 48 hours. Remove wet stains immediately with acetone.
Warning:
May cause an allergic reaction. Do not use at temperatures below +5°C. After use, close the container properly and store it in a dry, cool place protected from frost. Minimum shelf life is 24 months. Shelf life is reduced after opening.