Borniak Digital smoker UWD-NT-150 with timer / ALU 1.5CZ

Show alternatives
Product accessories

Don't like the alternatives?

Choose from the full offer

Borniak Digital smoker UWD-NT-150 with timer / ALU 1.5CZ

The Borniak digital smoker with improved insulation, reinforced 1.5CZ electronics and a 1400 W heating coil ensures sufficient smoking power. The outer shell is made of Alu-zinc and the inner parts of the smoker are made of food-safe stainless steel. The device enables cold smoke smoking and conventional hot smoking with temperature settings ranging from 20-120 °C. If the maximum operating temperature inside the smoker is exceeded, you will be alerted to the possibility of a fire by a distinctive audible signal. Thanks to the timer control panel you can set the operating time of the electric heater and separately the operating time of the smoke generator and the fan. An electronic control panel for precise temperature control ensures low operating costs. With a capacity of 150 litres and 7 levels for smoking grates, the smoker can hold up to 20 kg of meat or smoked products. The smoker is very efficient and energy-saving thanks to a special wall insulation technique with silicone seals and magnetic closure, which ensures smooth smoking without large temperature fluctuations and reduces tar formation. The innovative stainless steel deflector catches dripping grease, which, thanks to the stepped design, flows directly into the waste bowl. The smoker has practical handles on the sides for easy carrying and four height-adjustable feet for maximum stability, which can be replaced with castors (not included) for better movement of the smoker. The smoker also includes a drawer for a dryer.

Borniak Digital smoker UWD-NT-150 with timer / ALU 1.5CZ

Key features of Borniak digital smoker with timer UWD-NT-150 / ALU 1.5C

  • Suitable for preparing meat, sausages and also cheese
  • The products are characterised by their lasting taste, aroma and colour
  • Allows smoking with classic and cold smoke up to 20 kilograms of product
  • Inner parts of the smoker made of high quality stainless steel
  • Perfectly sealing door with magnetic lock
  • Stainless steel deflector catches dripping grease
  • Practical side handles for easy carrying
  • Four height-adjustable feet for maximum stability
  • Highly accurate temperature setting by digital control unit for smoking from 20 °C to 120 °C
  • Timer allows you to set the working time of the main spiral, generator and fan

Original chipping as damage prevention

The smokehouse generator provides constant and optimal smoke production for up to 8 hours, all depending on the type of wood chips. Borniak breadcrumbs are produced without chemical additives and preservatives. It is recommended to use the smoker with original wood chips to prevent mechanical damage. In the case of using other than original Borniak wood chips, the generator is likely to be damaged.

Borniak Digital smoker UWD-NT-150 with timer / ALU 1.5CZ

Smoke generator with reservoir

At the heart of the smokehouse is a smoke generator with a chip hopper with automatic feeder. It continuously feeds wood chips into the chamber where combustion and smoke development takes place. The wood chips do not burn when burnt, but only smoulder slightly, which reduces the risk of fire and tar formation. Included is a stainless steel drip tray for grease and water to catch ash. The innovative stainless steel deflector catches dripping grease, which, thanks to the stepped design, flows directly into the waste tray. With the chimney damper you can easily control the smoke density as required. The heating coil of the smoke generator has an input of 115 W and the burnt wood chips fall into a stainless steel bowl with water.

Borniak Digital smoker UWD-NT-150 with timer / ALU 1.5CZ

Package contents:
1× smoke generator, 1× stainless steel deflector, 1× chimney with flap, 1× grate for the smokehouse, 1× drip tray, 3× bars for hanging, 5× S-hooks, 5× double hooks, 2× stainless steel bowl for water and ash, 4× adjustable legs, 1× smoke generator lid, 1× drip tray under the chimney, 2× carrying handle, 1× door handle, 2× power cable, 1× extension cable for GK, 5× wood chips 2 l
Chamber capacity:150 l
Exterior material:Alu-zinc
Smoke chamber material:Stainless steel
Power consumption: 1400 W (heating element) + 115 W (smoke generator)
Collateral:8 A
Generator fuse:1,25 A
Voltage: 230V
Fuel:Wood sawdust (beech, alder, oak, birch or plum)
Outer dimension with generator:72 × 115 × 52 cm (W × H × D)
Outer dimension without generator:63 × 122 × 52 cm (W × H × D)
Inner dimension of the smoking chamber: 48.5 × 92.5 × 42 cm (W × H × D)
Grid size: 48 × 40 cm (W × D)
Chimney diameter: 100 mm
Maximum temperature:max. 120 °C with audible overheating alarm
Maximum load: 20kg
Weight: 35 kg

Specifications

Grill type

Heating method Wood
Grill Type Smoker

Material

Grill Material Stainless steel

Grill dimensions

Grill Height 115 cm
Grill Width 72 cm
Grill Depth 52 cm

Weight

Weight 35 kg

Features

Features Timer, Drip tray
Code:  PITgri049
Manufacturer information

Udime-grilujeme.cz, Plumlovská 3614, 796 04 Prostějov, [email protected], https://udime-grilujeme.cz/

Show more