BULDOK Paint remover 0.5 kg

With BULDOK you can easily and quickly remove paint of any colour . This modern product playfully removes coatings, especially from wooden, metal and concrete surfaces. BULDOK can handle oil, synthetic, epoxy or polyurethane and dispersion coatings. But the paint remover also cleans your brushes perfectly without the need for additional solvents. You can apply BULDOK immediately. Thanks to its gel consistency, it will apply well to both horizontal and vertical surfaces without the product dripping.

Key features of BULDOK paint remover Paint remover, 0.5 kg

• With BULDOK you can easily and quickly remove any paint
• The modern product playfully removes coatings, especially from wooden, metal and concrete surfaces
• BULDOK handles oil, synthetic, epoxy or polyurethane and dispersion coatings
• But the paint remover also cleans your brushes perfectly
• Thanks to the gel consistency of the remover, it is well applied on horizontal and vertical surfaces
• You can apply BULDOK immediately

Consistency:
viscous liquid

Workflow:
Mix the remover thoroughly. It is best to apply the paint with a brush in a minimal layer. The gel consistency is very well applied to both horizontal and vertical surfaces. Spread the remover well and quickly. Do not re-enter the applied layer, otherwise the ongoing removal process will be disrupted. In 1 to 5 minutes, the paint softens, swells and thus separates from the surface. You can then simply remove the damaged paint with a spatula or scraper. The recommended optimum substrate and air temperature is 15 to 25 ° C. At lower temperatures, the process time increases. If you cannot remove the paint on the first try, repeat the whole process again. After removing the original paint, it is necessary to degrease the surface (with white spirit or thinner) before applying the new paint. For both metal and wooden substrates, it is better to regrind the surface.

Warning:
Apply outdoors or in well-ventilated areas. When working, it is forbidden to work with open flames or perform activities that require high temperatures. The remover can damage some plastics.

Base:
organic solvents with additives