Ceresit Chemoprene for floors CH 50, 0,5l

Ceresit CH 50 flooring chemoprene is a high strength solvent contact adhesive. It is designed for full surface gluing of flooring, taping and gluing of profiles and skirting boards. It is suitable for bonding and taping PVC coverings, rubber and rubber coverings with smooth, ground back side, stair and skirting profiles, linoleum coverings, corks, textile coverings on concrete, Cement, gravelled and different background. You can also use it for gluing on stairs, walls and ceiling. It contains solvents, but it does not contain toluene. It is resistant to cleaning agents and is immediately loadable. It offers high adhesive strength and high ultimate strength. Allows density adjustment with diluent. The Ceresit CH 50 floor chemoprene can also be used under wheelchairs and for underfloor heating.

How to use:
1. Treasures must be straight, permanently dry, clean, without design flaws, cracks and adhesion-impairing substances, tensile and compressive strength according to current valid standards (CSN 744505, ...) and regulations.
2. Mix the adhesive well before use.
3. Apply the adhesive to a dry, degreased and dust-free substrate. For Floors, apply unilaterally to a larger area in a thin layer using an A2, A3 or roller squeegee and press the bonded covering into the adhesive layer to wet the reverse side of the covering, then release and allow to air out.