D-c-fix Tropea Oak, width 67.5cm

The d-c-fix self-adhesive film will bring your furniture to life. It's also suitable for window panes, storage boxes, binders, jars, tiles, doors, door frames and kitchen units. It's non-toxic, environmentally friendly and lightfast. The film is free from heavy metals and the adhesive used is solvent-free. It is also resistant to abrasion. You can apply it to any smooth, dry and clean surface, including absorbent surfaces. The d-c-fix film has an integrated self-adhesive layer, which makes application easy. Use scissors or a utility knife to cut it to the size you need.

How to use:
Clean and degrease the surface. Clean window panes with an alcohol-based cleaner and let them dry. Clean furniture and laminate with a damp cloth. First, carefully measure everything dry, making sure to account for the direction of the pattern on wood-effect films. You can cut the film with scissors, or for more precision, use a utility knife with a metal straight edge. For larger areas, it's a good idea to wet the surface with a spray bottle. This does not apply to mirror self-adhesive films, chalkboard films, metallic-effect wallpapers and velour wallpapers. Water is ideal for window films and wood-effect films. Peel back about 10cm of the backing paper and place the adhesive side onto the surface. Slowly and gradually pull off the backing paper while smoothing the film with a squeegee or sponge. Push out any air bubbles to the side. If the film wrinkles or becomes crooked, carefully peel it back, stretch it to correct, and reapply. The film has a so-called “bonding timer”, which means you can only make corrections by peeling it off within a few to several dozen minutes. After a few hours, the adhesive bonds firmly and correction is no longer possible. When covering larger areas that require joining, an overlap of 5–10mm is recommended. Let the film overhang at the edges and trim it at the very end. When applying to edges, bends or folds, you can use a hot air gun to make the film more pliable, allowing it to bend and stretch. You need to work carefully to avoid irreversible damage to the film. You can also use a squeegee for smoothing.