d-c-fix Tropea Oak, 90cm width

The D-c-fix self-adhesive film will bring new life to your furniture. It's also suitable for window panes, storage boxes, files, jars, tiles, doors, frames, or kitchen units. It's non-toxic, environmentally friendly and lightfast. It contains no heavy metals and the adhesive used is solvent-free. It's also resistant to abrasion. You can stick it to any smooth, dry and clean surface, as well as absorbent surfaces. The D-c-fix film has an integrated self-adhesive layer, which makes it easy to apply. You can cut it to the size you need using scissors or a utility knife.

Application:
Clean and degrease the surface. Clean window panes with an alcohol-based cleaner and let them dry. Clean furniture and laminate with a damp cloth. First, carefully measure everything dry, making sure to account for the direction of the pattern on wood-effect films. You can cut the film with scissors, or for more precision, use a utility knife and a metal straightedge. When applying to larger areas, it's a good idea to moisten the surface with a water sprayer. This does not apply to mirror, chalkboard, metallic, or velour self-adhesive films. Water is ideal for window films and wood-effect films. Peel back about 10cm of the backing paper and apply the adhesive side to the surface. Slowly and gradually pull off the backing paper while smoothing the film with a squeegee or sponge. Push out any bubbles to the sides. If the film wrinkles or becomes crooked, carefully peel it back, straighten it by pulling it taut, and reapply. The film has a so-called “bonding timer”, which means you can only make corrections by peeling it off within a few minutes to tens of minutes. After a few hours, the adhesive will bond firmly and correction will no longer be possible. When covering large areas that require joining, it's best to overlap by 5–10mm. Let the film overhang at the edges and trim it at the very end. When wrapping edges or bends, you can use a hot air gun, which will make the film more pliable, allowing it to bend and stretch. You must work carefully to avoid irreversible damage to the film. You can also use a squeegee for smoothing.