Dulux Trade Weathershield Silicon Plus 10 l, NCS S 6502-B

New arrival 5,779,-

Dulux Trade Weathershield Silicon Plus 10 l, NCS S 6502-B

Dulux Trade Weathershield Silicon Plus silicone facade paint is designed for concrete and mineral plasters. It creates an opaque, matt, and water-repellent surface. Thanks to its microporous structure, the paint is vapour-permeable, which means it allows water vapour to escape from the masonry. It contains zinc pyrithione, which protects the facade against the growth of algae and moss, and is also resistant to UV radiation. The paint is applied in two coats with a brush, roller, or by spraying. Theoretical coverage is 16m²/L and the approximate drying time is 4 hours.

Key features of Dulux Trade Weathershield Silicon Plus facade paint in RAL 7012 Basalt Grey, 10L

  • Designed for concrete and mineral plasters
  • Based on silicone resin
  • Opaque matt finish
  • Vapour-permeable and water-repellent
  • Contains an additive against algae and moss growth (zinc pyrithione)
  • Resistant to UV radiation and class 2 abrasion
  • Theoretical coverage of 16m²/L
  • Approximate drying time of 4 hours
  • Application by brush, roller or spray; 2 coats recommended
  • Package volume 10L, weight 13.81kg

Application and protective properties

This facade paint features high durability. The coating not only protects the surface from UV radiation but also, thanks to its zinc pyrithione content, from the growth of algae and moss. Its class 2 rating indicates high resistance to wet scrub. The microporous film of the paint is vapour-permeable yet water-repellent, which helps to keep the facade dry. For best results, the paint is applied in two coats. You can apply it with a brush, roller, or by spraying. The paint does not require dilution before use.

Specifications

Features

Colour Grey
Shade 7,012 RAL
Capacity 10 l
Area 160 m2
Dilution No dilution needed
Suitable for Plaster, concrete
Features Anti algae, Water vapor permeability, UV resistance
Type Facade
Weight 13.81 kg (13,810 g)

Type

Coating type Coverage
Colour Grey
Gloss after drying Matte

Technical parameters

Theoretical yield 16 m2/l
Whiteness Standard white
Approximate drying time 4 h
Abrasion resistance 2
Number of recommended coatings 2

Features

Features Vapour permeable, UV-resistant, Water-soluble
Suitable for concrete, Mineral plasters
Application options brush, Roller, Spray

Safety warning

Hazard information (H statements)
(EUH208) Obsahuje senzibilizující látky. Může vyvolat alergickou reakci. (EUH211) Pozor! Při postřiku se mohou vytvářet nebezpečné respirabilní kapičky. Nevdechujte aerosoly nebo mlhu. (H412) Škodlivý pro vodní organismy, s dlouhodobými účinky.
Safety instructions (precautionary statements – P phrases)
(P101) Je-li nutná lékařská pomoc, mějte po ruce obal nebo štítek výrobku.
(P102) Uchovávejte mimo dosah dětí.
(P262) Zabraňte styku s očima, kůží nebo oděvem.
(P312) Necítíte-li se dobře, volejte TOXIKOLOGICKÉ INFORMAČNÍ STŘEDISKO / lékaře /… .
(P501) Odstraňte obsah/obal …
Code:  DULfab64
Warranty: 24 months
Links: Producer's Website:
Manufacturer information

Akzo Nobel Coatings CZ, a.s., Vyskočilova 1481/4, 140 00 Praha 4 – Michle, Česká republika, tel.: +420 261 399 100, e-mail: [email protected]

Show more