Dulux Trade Weathershield Silicon Plus 10L, NCS S 4005-B

New arrival 5,109,-

Dulux Trade Weathershield Silicon Plus 10L, NCS S 4005-B

Dulux Trade Weathershield Silicon Plus masonry paint, based on silicone resin, is designed for concrete and mineral plasters. It creates an opaque, matt, and vapour-permeable film that allows water vapour to escape from the masonry. At the same time, the surface is water-repellent and, thanks to its zinc pyrithione content, protects the facade against algae and moss growth. The paint is applied in two coats with a brush, roller, or spray gun. The theoretical coverage is up to 16m²/L, and the approximate drying time is 4 hours.

Key features of Dulux Trade Weathershield Silicon Plus masonry paint in RAL 7001 Silver Grey, 10L

  • For concrete and mineral plasters
  • Silicone-based
  • Opaque matt finish
  • Vapour-permeable and water-repellent
  • Contains zinc pyrithione to protect against algae and moss
  • UV and class 2 abrasion resistant
  • Theoretical coverage of up to 16m²/L
  • Approximate drying time of 4 hours
  • Application by brush, roller or spray gun
  • Package volume 10L, weight 15.88kg
  • 2 coats recommended

Protective properties of the paint

The paint creates a microporous film that is highly vapour-permeable yet water-repellent. This combination of properties helps to keep the masonry dry. The coating is resistant to weathering and UV radiation, which contributes to its stability. It contains the active ingredient zinc pyrithione, which protects the facade surface from algae and moss growth. The mechanical resistance of the coating falls into class 2, indicating good scrub resistance.

Specifications

Features

Colour Grey
Shade 7,001 RAL
Capacity 10 l
Area 160 m2
Dilution No dilution needed
Suitable for Plaster, concrete
Features Anti algae, Water vapor permeability, UV resistance
Type Facade
Weight 15.88 kg (15,880 g)

Type

Coating type Coverage
Colour Grey
Gloss after drying Matte

Technical parameters

Theoretical yield 16 m2/l
Whiteness Standard white
Approximate drying time 4 h
Abrasion resistance 2
Number of recommended coatings 2

Features

Features Vapour permeable, UV-resistant, Water-soluble
Suitable for concrete, Mineral plasters
Application options brush, Roller, Spray

Safety warning

Hazard information (H statements)
(EUH208) Obsahuje senzibilizující látky. Může vyvolat alergickou reakci. (EUH211) Pozor! Při postřiku se mohou vytvářet nebezpečné respirabilní kapičky. Nevdechujte aerosoly nebo mlhu. (H412) Škodlivý pro vodní organismy, s dlouhodobými účinky.
Safety instructions (precautionary statements – P phrases)
(P101) Je-li nutná lékařská pomoc, mějte po ruce obal nebo štítek výrobku.
(P102) Uchovávejte mimo dosah dětí.
(P262) Zabraňte styku s očima, kůží nebo oděvem.
(P312) Necítíte-li se dobře, volejte TOXIKOLOGICKÉ INFORMAČNÍ STŘEDISKO / lékaře /… .
(P501) Odstraňte obsah/obal …
Code:  DULfab49
Warranty: 24 months
Links: Producer's Website:
Manufacturer information

Akzo Nobel Coatings CZ, a.s., Vyskočilova 1481/4, 140 00 Praha 4 – Michle, Česká republika, tel.: +420 261 399 100, e-mail: [email protected]

Show more