Dulux Trade Weathershield Silicon Plus 10L, NCS S 4502-G

New arrival 5,779,-

Dulux Trade Weathershield Silicon Plus 10L, NCS S 4502-G

Dulux Trade Weathershield Silicon Plus silicone facade paint is designed for concrete and mineral plasters. It creates an opaque, matt, and microporous film that is both vapour-permeable and water-repellent. Thanks to its zinc pyrithione content, it protects the facade against algae and moss growth and resists UV radiation. The paint is applied in two coats with a brush, roller, or spray. Theoretical coverage is up to 16m²/L, and the approximate drying time is 4 hours.

Key features of Dulux Trade Weathershield Silicon Plus facade paint in RAL 7042 Traffic Grey A, 10L

  • Designed for concrete and mineral plasters
  • Silicone resin base
  • Opaque matt finish
  • Microporous, vapour-permeable, and water-repellent
  • Contains an additive to prevent algae and moss growth (zinc pyrithione)
  • UV-resistant and class 2 abrasion resistance
  • Theoretical coverage of up to 16m²/L
  • Approximate drying time of 4 hours
  • Apply with a brush, roller, or spray; 2 coats recommended
  • Package volume 10L, weight 13.81kg

Protective properties and use

This facade paint is designed for the protection and decoration of exterior surfaces. Its microporous structure lets masonry breathe by allowing water vapour to escape, while the water-repellent surface prevents water from penetrating from the outside. Protection against algae and moss is enhanced by the active ingredient zinc pyrithione. The coating is also resistant to UV radiation, which helps to maintain the facade's appearance. Its abrasion resistance falls into class 2, indicating good mechanical durability of the surface.

Specifications

Features

Colour Grey
Shade 7,042 RAL
Capacity 10 l
Area 160 m2
Dilution No dilution needed
Suitable for Plaster, concrete
Features Anti algae, Water vapor permeability, UV resistance
Type Facade
Weight 13.81 kg (13,810 g)

Type

Coating type Coverage
Colour Grey
Gloss after drying Matte

Technical parameters

Theoretical yield 16 m2/l
Whiteness Standard white
Approximate drying time 4 h
Abrasion resistance 2
Number of recommended coatings 2

Features

Features Vapour permeable, UV-resistant, Water-soluble
Suitable for concrete, Mineral plasters
Application options brush, Roller, Spray

Safety warning

Hazard information (H statements)
(EUH208) Obsahuje senzibilizující látky. Může vyvolat alergickou reakci. (EUH211) Pozor! Při postřiku se mohou vytvářet nebezpečné respirabilní kapičky. Nevdechujte aerosoly nebo mlhu. (H412) Škodlivý pro vodní organismy, s dlouhodobými účinky.
Safety instructions (precautionary statements – P phrases)
(P101) Je-li nutná lékařská pomoc, mějte po ruce obal nebo štítek výrobku.
(P102) Uchovávejte mimo dosah dětí.
(P262) Zabraňte styku s očima, kůží nebo oděvem.
(P312) Necítíte-li se dobře, volejte TOXIKOLOGICKÉ INFORMAČNÍ STŘEDISKO / lékaře /… .
(P501) Odstraňte obsah/obal …
Code:  DULfab118
Warranty: 24 months
Links: Producer's Website:
Manufacturer information

Akzo Nobel Coatings CZ, a.s., Vyskočilova 1481/4, 140 00 Praha 4 – Michle, Česká republika, tel.: +420 261 399 100, e-mail: [email protected]

Show more