Dulux Trade Weathershield Silicon Plus 10L, NCS S 7005-B

New arrival 5,779,-

Dulux Trade Weathershield Silicon Plus 10L, NCS S 7005-B

Dulux Trade Weathershield Silicon Plus silicone façade paint is designed for concrete and mineral plasters. It creates an opaque, matt, and microporous film which allows water vapour to escape from the masonry while repelling water. It contains zinc pyrithione, which protects the façade against the growth of algae and moss, and is resistant to UV radiation. The paint is applied in two coats with a brush, roller, or spray gun. Theoretical coverage is up to 16m²/L and the approximate drying time is 4 hours.

Key features of Dulux Trade Weathershield Silicon Plus façade paint in RAL 7015 Slate Grey, 10L

  • Suitable for concrete and mineral plasters
  • Silicone base
  • Opaque matt finish
  • Vapour-permeable and water-repellent
  • With zinc pyrithione to protect against algae and moss
  • UV and class 2 abrasion resistant
  • Theoretical coverage of up to 16m²/L
  • Approximate drying time of 4 hours
  • Apply with a brush, roller, or spray gun; 2 coats recommended
  • Package volume 10L, weight 13.81kg

Protective properties and application

The paint is based on a silicone resin, which forms a microporous yet water-repellent film. This allows the masonry to breathe while protecting the surface from rainwater penetration. Protection against biological attack is enhanced by the inclusion of zinc pyrithione, which is effective against the growth of algae and moss. The coating also maintains its appearance thanks to its resistance to UV radiation and class 2 mechanical abrasion. The paint is applied in two coats, and it's necessary to leave a gap of approximately 4 hours between each coat.

Specifications

Features

Colour Grey
Shade 7,015 RAL
Capacity 10 l
Area 160 m2
Dilution No dilution needed
Suitable for Plaster, concrete
Features Anti algae, Water vapor permeability, UV resistance
Type Facade
Weight 13.81 kg (13,810 g)

Type

Coating type Coverage
Colour Grey
Gloss after drying Matte

Technical parameters

Theoretical yield 16 m2/l
Whiteness Standard white
Approximate drying time 4 h
Abrasion resistance 2
Number of recommended coatings 2

Features

Features Vapour permeable, UV-resistant, Water-soluble
Suitable for concrete, Mineral plasters
Application options brush, Roller, Spray

Safety warning

Hazard information (H statements)
(EUH208) Obsahuje senzibilizující látky. Může vyvolat alergickou reakci. (EUH211) Pozor! Při postřiku se mohou vytvářet nebezpečné respirabilní kapičky. Nevdechujte aerosoly nebo mlhu. (H412) Škodlivý pro vodní organismy, s dlouhodobými účinky.
Safety instructions (precautionary statements – P phrases)
(P101) Je-li nutná lékařská pomoc, mějte po ruce obal nebo štítek výrobku.
(P102) Uchovávejte mimo dosah dětí.
(P262) Zabraňte styku s očima, kůží nebo oděvem.
(P312) Necítíte-li se dobře, volejte TOXIKOLOGICKÉ INFORMAČNÍ STŘEDISKO / lékaře /… .
(P501) Odstraňte obsah/obal …
Code:  DULfab70
Warranty: 24 months
Links: Producer's Website:
Manufacturer information

Akzo Nobel Coatings CZ, a.s., Vyskočilova 1481/4, 140 00 Praha 4 – Michle, Česká republika, tel.: +420 261 399 100, e-mail: [email protected]

Show more