Dulux Trade Weathershield Silicon Plus 10L, NCS S 7502-B

New arrival 5,779,-

Dulux Trade Weathershield Silicon Plus 10L, NCS S 7502-B

Dulux Trade Weathershield Silicon Plus silicone masonry paint is designed for concrete and mineral plasters. It creates an opaque, matt, and breathable film that allows water vapour to escape from the masonry while repelling water from the surface. It contains zinc pyrithione, which protects the facade against algae and moss growth, and is resistant to UV radiation. The paint is applied in two coats with a brush, roller, or spray gun. Theoretical coverage is 16m²/L and the approximate drying time is 4 hours.

Key features of Dulux Trade Weathershield Silicon Plus masonry paint in RAL 7016 Anthracite Grey, 10L

  • Designed for concrete and mineral plasters
  • Silicone resin-based
  • Opaque matt finish
  • Breathable and water-repellent
  • With zinc pyrithione additive to prevent algae and moss
  • UV resistant and class 2 scrub resistant
  • Theoretical coverage of 16m²/L
  • Approximate drying time of 4 hours
  • Application by brush, roller, or spray; water-based; 2 coats recommended
  • Package volume 10L, weight 14.15kg

Protective properties and durability

Dulux Trade Weathershield Silicon Plus masonry paint creates a microporous film that is both breathable and water-repellent. This combination of properties helps to keep masonry dry. The surface is resistant to UV radiation, which contributes to colour stability. The active ingredient, zinc pyrithione, protects the paint film from algae and moss growth. The paint also meets class 2 scrub resistance requirements, indicating good mechanical durability of the surface.

Specifications

Features

Colour Grey
Shade 7,016 RAL
Capacity 10 l
Area 160 m2
Dilution No dilution needed
Suitable for Plaster, concrete
Features Anti algae, Water vapor permeability, UV resistance
Type Facade
Weight 14.15 kg (14,150 g)

Type

Coating type Coverage
Colour Grey
Gloss after drying Matte

Technical parameters

Theoretical yield 16 m2/l
Whiteness Standard white
Approximate drying time 4 h
Abrasion resistance 2
Number of recommended coatings 2

Features

Features Vapour permeable, UV-resistant, Water-soluble
Suitable for concrete, Mineral plasters
Application options brush, Roller, Spray

Safety warning

Hazard information (H statements)
(EUH208) Obsahuje senzibilizující látky. Může vyvolat alergickou reakci. (EUH211) Pozor! Při postřiku se mohou vytvářet nebezpečné respirabilní kapičky. Nevdechujte aerosoly nebo mlhu. (H412) Škodlivý pro vodní organismy, s dlouhodobými účinky.
Safety instructions (precautionary statements – P phrases)
(P101) Je-li nutná lékařská pomoc, mějte po ruce obal nebo štítek výrobku.
(P102) Uchovávejte mimo dosah dětí.
(P262) Zabraňte styku s očima, kůží nebo oděvem.
(P312) Necítíte-li se dobře, volejte TOXIKOLOGICKÉ INFORMAČNÍ STŘEDISKO / lékaře /… .
(P501) Odstraňte obsah/obal …
Code:  DULfab73
Warranty: 24 months
Links: Producer's Website:
Manufacturer information

Akzo Nobel Coatings CZ, a.s., Vyskočilova 1481/4, 140 00 Praha 4 – Michle, Česká republika, tel.: +420 261 399 100, e-mail: [email protected]

Show more