Dulux Trade Weathershield Silicon Plus 2.5L, NCS S 4005-B

New arrival 2,009,-

Dulux Trade Weathershield Silicon Plus 2.5L, NCS S 4005-B

Dulux Trade Weathershield Silicon Plus silicone facade paint is designed for concrete and mineral plasters. It creates an opaque, matt film that is microporous, allowing water vapour to escape from the masonry while also being water-repellent. It contains zinc pyrithione to protect the facade against algae and moss growth, and it is resistant to UV radiation. Apply in two coats with a brush, roller, or by spraying. It is water-dilutable. Theoretical coverage is up to 16m²/L and the approximate drying time is 4 hours.

Key features of Dulux Trade Weathershield Silicon Plus facade paint in RAL 7001 Silver Grey, 2.5L

  • Designed for concrete and mineral plasters
  • Silicone resin base
  • Opaque matt finish
  • Vapour-permeable and water-repellent
  • Contains zinc pyrithione to prevent algae and moss
  • Resistant to UV radiation and class 2 abrasion
  • Theoretical coverage up to 16m²/L
  • Approximate drying time of 4 hours
  • Apply by brush, roller or spray; 2 coats recommended
  • Package volume 2.5L, weight 3.99kg

Protective properties and use

This silicone resin-based facade paint creates a microporous film that is vapour-permeable yet water-repellent. The coating is resistant to weathering, including UV radiation. It contains the active ingredient zinc pyrithione, which protects the facade surface against the growth of algae and moss. The paint is suitable for new and previously painted mineral plasters and concrete surfaces. Its abrasion resistance corresponds to class 2.

Specifications

Features

Colour Grey
Shade 7,001 RAL
Capacity 2.5 l
Area 40 m2
Dilution No dilution needed
Suitable for Plaster, concrete
Features Anti algae, Water vapor permeability, UV resistance
Type Facade
Weight 3.99 kg (3,990 g)

Type

Coating type Coverage
Colour Grey
Gloss after drying Matte

Technical parameters

Theoretical yield 16 m2/l
Whiteness Standard white
Approximate drying time 4 h
Abrasion resistance 2
Number of recommended coatings 2

Features

Features Vapour permeable, UV-resistant, Water-soluble
Suitable for concrete, Mineral plasters
Application options brush, Roller, Spray

Safety warning

Hazard information (H statements)
(EUH208) Obsahuje senzibilizující látky. Může vyvolat alergickou reakci. (EUH211) Pozor! Při postřiku se mohou vytvářet nebezpečné respirabilní kapičky. Nevdechujte aerosoly nebo mlhu. (H412) Škodlivý pro vodní organismy, s dlouhodobými účinky.
Safety instructions (precautionary statements – P phrases)
(P101) Je-li nutná lékařská pomoc, mějte po ruce obal nebo štítek výrobku.
(P102) Uchovávejte mimo dosah dětí.
(P262) Zabraňte styku s očima, kůží nebo oděvem.
(P312) Necítíte-li se dobře, volejte TOXIKOLOGICKÉ INFORMAČNÍ STŘEDISKO / lékaře /… .
(P501) Odstraňte obsah/obal …
Code:  DULfab50
Warranty: 24 months
Links: Producer's Website:
Manufacturer information

Akzo Nobel Coatings CZ, a.s., Vyskočilova 1481/4, 140 00 Praha 4 – Michle, Česká republika, tel.: +420 261 399 100, e-mail: [email protected]

Show more