Dulux Trade Weathershield Silicon Plus 2.5L, NCS S 8005-B

New arrival 2,349,-

Dulux Trade Weathershield Silicon Plus 2.5L, NCS S 8005-B

Dulux Trade Weathershield Silicon Plus facade paint, based on silicone resin, is designed for concrete and mineral plasters. It creates an opaque, matt, and microporous film that is water-repellent. Thanks to its vapour permeability, the paint allows water vapour to escape from the masonry. It contains zinc pyrithione to prevent the growth of algae and moss, and the paint is also resistant to UV radiation. Apply in two coats by spraying, or with a brush or roller. The theoretical coverage is up to 16m²/L and the paint dries in approximately 4 hours.

Key features of Dulux Trade Weathershield Silicon Plus facade paint in RAL 7021 Black Grey, 2.5L

  • Designed for concrete and mineral plasters
  • Silicone resin base
  • Opaque matt finish
  • Vapour-permeable and water-repellent
  • With an additive against algae and moss (zinc pyrithione)
  • Resistant to UV radiation and Class 2 abrasion
  • Theoretical coverage of up to 16m²/L
  • Approximate drying time of 4 hours
  • Application by spray, brush or roller; 2 coats recommended
  • Package volume 2.5L, weight 3.58kg

Durability and protective properties

The paint creates a microporous film that is vapour-permeable, allowing the masonry to breathe. The surface is also water-repellent, which limits moisture penetration into the substrate. To protect the facade from biological attack, the paint contains zinc pyrithione, which is effective against the growth of algae and moss. The coating is also resistant to UV radiation, contributing to the colour stability of the facade. The mechanical durability of the surface is proven by its classification in Class 2 for abrasion resistance.

Specifications

Features

Colour Grey
Shade 7,021 RAL
Capacity 2.5 l
Area 40 m2
Dilution No dilution needed
Suitable for Plaster, concrete
Features Anti algae, Water vapor permeability, UV resistance
Type Facade
Weight 3.58 kg (3,580 g)

Type

Coating type Coverage
Colour Grey
Gloss after drying Matte

Technical parameters

Theoretical yield 16 m2/l
Whiteness Standard white
Approximate drying time 4 h
Abrasion resistance 2
Number of recommended coatings 2

Features

Features Vapour permeable, UV-resistant, Water-soluble
Suitable for concrete, Mineral plasters
Application options brush, Roller, Spray

Safety warning

Hazard information (H statements)
(EUH208) Obsahuje senzibilizující látky. Může vyvolat alergickou reakci. (EUH211) Pozor! Při postřiku se mohou vytvářet nebezpečné respirabilní kapičky. Nevdechujte aerosoly nebo mlhu. (H412) Škodlivý pro vodní organismy, s dlouhodobými účinky.
Safety instructions (precautionary statements – P phrases)
(P101) Je-li nutná lékařská pomoc, mějte po ruce obal nebo štítek výrobku.
(P102) Uchovávejte mimo dosah dětí.
(P262) Zabraňte styku s očima, kůží nebo oděvem.
(P312) Necítíte-li se dobře, volejte TOXIKOLOGICKÉ INFORMAČNÍ STŘEDISKO / lékaře /… .
(P501) Odstraňte obsah/obal …
Code:  DULfab77
Warranty: 24 months
Links: Producer's Website:
Manufacturer information

Akzo Nobel Coatings CZ, a.s., Vyskočilova 1481/4, 140 00 Praha 4 – Michle, Česká republika, tel.: +420 261 399 100, e-mail: [email protected]

Show more