Dulux Trade Weathershield Silicon Plus 5 l, NCS S 7005-B80G

New arrival 3,449,-

Dulux Trade Weathershield Silicon Plus 5 l, NCS S 7005-B80G

Dulux Trade Weathershield Silicon Plus silicone facade paint is designed for concrete and mineral plasters. It creates an opaque, matt, and vapour-permeable film that allows water vapour to escape from the masonry while also being water-repellent. It contains zinc pyrithione, which protects the facade against the growth of algae and moss, and is resistant to UV radiation. The paint is applied in two coats with a brush, roller or by spraying. Theoretical coverage is 16m²/L and it dries in approximately 4 hours.

Key features of Dulux Trade Weathershield Silicon Plus facade paint in RAL 7043 Traffic Grey B, 5L

  • Designed for concrete and mineral plasters
  • Silicone base
  • Opaque matt finish
  • Vapour-permeable and water-repellent
  • With an additive against algae and moss (zinc pyrithione)
  • Resistant to UV radiation and class 2 abrasion
  • Theoretical coverage of 16m²/L
  • Approximate drying time of 4 hours
  • Application by brush, roller or spray; 2 coats recommended
  • Package volume 5L, weight 6.92kg

Durability and protective properties

The paint's base is a silicone resin that creates a microporous film. This layer is vapour-permeable, which lets the masonry breathe, but at the same time is water-repellent and protects the surface from rainwater penetration. To protect against biological attack, the paint contains the active ingredient zinc pyrithione to prevent the growth of algae and moss. The coating also resists UV radiation and normal mechanical wear and tear well, as demonstrated by its class 2 abrasion resistance rating.

Specifications

Features

Colour Grey
Shade 7,043 RAL
Capacity 5 l
Area 80 m2
Dilution No dilution needed
Suitable for Plaster, concrete
Features Anti algae, Water vapor permeability, UV resistance
Type Facade
Weight 6.92 kg (6,920 g)

Type

Coating type Coverage
Colour Grey
Gloss after drying Matte

Technical parameters

Theoretical yield 16 m2/l
Whiteness Standard white
Approximate drying time 4 h
Abrasion resistance 2
Number of recommended coatings 2

Features

Features Vapour permeable, UV-resistant, Water-soluble
Suitable for concrete, Mineral plasters
Application options brush, Roller, Spray

Safety warning

Hazard information (H statements)
(EUH208) Obsahuje senzibilizující látky. Může vyvolat alergickou reakci. (EUH211) Pozor! Při postřiku se mohou vytvářet nebezpečné respirabilní kapičky. Nevdechujte aerosoly nebo mlhu. (H412) Škodlivý pro vodní organismy, s dlouhodobými účinky.
Safety instructions (precautionary statements – P phrases)
(P101) Je-li nutná lékařská pomoc, mějte po ruce obal nebo štítek výrobku.
(P102) Uchovávejte mimo dosah dětí.
(P262) Zabraňte styku s očima, kůží nebo oděvem.
(P312) Necítíte-li se dobře, volejte TOXIKOLOGICKÉ INFORMAČNÍ STŘEDISKO / lékaře /… .
(P501) Odstraňte obsah/obal …
Code:  DULfab123
Warranty: 24 months
Links: Producer's Website:
Manufacturer information

Akzo Nobel Coatings CZ, a.s., Vyskočilova 1481/4, 140 00 Praha 4 – Michle, Česká republika, tel.: +420 261 399 100, e-mail: [email protected]

Show more