Dulux Trade Weathershield Silicon Plus 5L, NCS S 7005-B

New arrival 3,449,-

Dulux Trade Weathershield Silicon Plus 5L, NCS S 7005-B

Dulux Trade Weathershield Silicon Plus silicone facade paint is designed for concrete and mineral plasters. It creates an opaque, matt and microporous film that is vapour-permeable and water-repellent. It contains zinc pyrithione, which protects the facade against algae and moss growth, and is resistant to UV radiation. The paint is applied in two coats by spraying, brushing or rolling and is not diluted for application. Theoretical coverage is 16m²/L and the surface dries in approximately 4 hours.

Key features of Dulux Trade Weathershield Silicon Plus facade paint in RAL 7015 Slate Grey, 5L

  • Designed for concrete and mineral plasters
  • Silicone resin based
  • Opaque matt finish
  • Vapour-permeable and microporous
  • With zinc pyrithione additive against algae and moss
  • Resistant to UV radiation
  • Theoretical coverage of 16m²/L
  • Approximate drying time of 4 hours
  • Application by spraying, brushing or rolling, 2 coats recommended
  • Package volume 5L, weight 6.92kg
  • Water-repellent
  • Class 2 scrub resistance

Protective properties and composition

This paint is based on a silicone resin, which gives it high durability. The microporous structure of the coating allows water vapour to escape from the masonry. The surface is also water-repellent and protects against the penetration of rainwater. Class 2 scrub resistance indicates good mechanical resistance of the film. The paint contains the active ingredient zinc pyrithione, which protects the surface from algae and moss, and is resistant to UV radiation.

Specifications

Features

Colour Grey
Shade 7,015 RAL
Capacity 5 l
Area 80 m2
Dilution No dilution needed
Suitable for Plaster, concrete
Features Anti algae, Water vapor permeability, UV resistance
Type Facade
Weight 6.92 kg (6,920 g)

Type

Coating type Coverage
Colour Grey
Gloss after drying Matte

Technical parameters

Theoretical yield 16 m2/l
Whiteness Standard white
Approximate drying time 4 h
Abrasion resistance 2
Number of recommended coatings 2

Features

Features Vapour permeable, UV-resistant, Water-soluble
Suitable for concrete, Mineral plasters
Application options brush, Roller, Spray

Safety warning

Hazard information (H statements)
(EUH208) Obsahuje senzibilizující látky. Může vyvolat alergickou reakci. (EUH211) Pozor! Při postřiku se mohou vytvářet nebezpečné respirabilní kapičky. Nevdechujte aerosoly nebo mlhu. (H412) Škodlivý pro vodní organismy, s dlouhodobými účinky.
Safety instructions (precautionary statements – P phrases)
(P101) Je-li nutná lékařská pomoc, mějte po ruce obal nebo štítek výrobku.
(P102) Uchovávejte mimo dosah dětí.
(P262) Zabraňte styku s očima, kůží nebo oděvem.
(P312) Necítíte-li se dobře, volejte TOXIKOLOGICKÉ INFORMAČNÍ STŘEDISKO / lékaře /… .
(P501) Odstraňte obsah/obal …
Code:  DULfab72
Warranty: 24 months
Links: Producer's Website:
Manufacturer information

Akzo Nobel Coatings CZ, a.s., Vyskočilova 1481/4, 140 00 Praha 4 – Michle, Česká republika, tel.: +420 261 399 100, e-mail: [email protected]

Show more