ECOVACS Robotic lawnmower Goat A3000 LiDAR
Don't like the alternatives?
Choose from the full offer
ECOVACS Robotic lawnmower Goat A3000 LiDAR
ECOVACS Goat A3000 LiDAR Robotic Lawnmower
The ECOVACS Goat A3000 LiDAR Intelligent Robotic Lawnmower is equipped with a 32V power platform that enables high-performance mowing with two Dual Blade-Disc mowing discs with a 33 cm cutting width and a cutting speed of up to 0.7 metres per second. The robot can mow a 1,600 m² lawn in a record 8 hours. In addition, thanks to SmartEdge automatic mapping technology, there is no need for laying perimeter wires or manual mapping. The advanced LELS™ Pro navigation system and 360° dual 3D LiDAR, enhanced with 3D ToF Lidar and a fisheye AI camera, provides precise orientation in space, allowing the robot to navigate with centimeter accuracy, including efficient mowing around lawn edges. There is also intelligent route planning and AIVI 3D technology, which allows the mower to deftly avoid common obstacles. Plus, you can easily map your lawn, set no-go zones, set weekly mowing schedules or monitor your garden with the mower's camera using the mobile app. The ECOVACS Goat A3000 LiDAR has an electronic cutting height adjustment system (3 - 9 cm) and thanks to the all-terrain wheels, it can handle slopes of up to 50% (27°). The advantage of the mower is also very quiet operation and super fast recharging.
Cordless
Drive
3 Ah
Battery capacity
33cm
Shot
Without a basket
Basket volume
From 30 to 90 mm
Mowing height
Key features of the ECOVACS Goat A3000 LiDAR Robotic Lawnmower
- The Goat A3000 Intelligent Robotic Lawnmower is suitable for lawns up to 3,000 m²
- High-performance 32V energy platform with a cutting speed of up to 0.7 metres per second and super-fast 180W charging
- SmartEdge automatic mapping eliminates the need for physical boundary delineation using perimeter cables
- Navigation using 360° dual 3D LiDAR, augmented with 3D ToF Lidar and fisheye AI camera
- Two Dual Blade-Disc cutting discs with a cutting width of up to 33 cm reach speeds of up to 0.7 metres per second
- Intelligent route planning enables systematic mowing in even lanes
- TruEdge technology for thorough lawn edging
- Thanks to AIVI 3D technology, the Goat A3000 LiDAR Robotic Lawnmower can deftly avoid obstacles
- Splitting the map into mowing areas, setting up no-mow zones and weekly mowing schedules with ECOVACS HOME
- Electronic cut height adjustment system in 13 steps (3 to 9 cm)
A manicured lawn in no time
The ECOVACS GOAT A3000 LiDAR Robotic Lawnmower uses a 32V power platform that enables high-performance mowing with two mower discs at up to 0.7 metres per second. Dual Blade-Disc technology with a cutting width of up to 33 cm ensures high efficiency and time savings, especially when mowing larger gardens. Thanks to this advanced technology, the robot perfectly mows up to 400 m² per hour and ensures an evenly cut, carpet-like lawn.
No gaps, no unmown areas
The Dual Blade-Disc Technology ensures high efficiency and time savings when mowing lawns up to 1,600 m². Each of the two cutting discs is equipped with three steel blades with a gapless design. This ensures that not a single blade of uncut grass remains between the cutting discs.
Electronic cutting height adjustment
The GOAT A3000 LiDAR Robotic Lawnmower allows electronic adjustment of cutting height from 3 to 9 cm. Simply drag your finger across the phone display to adjust the cutting height in precise increments of 1 cm. This gives you a uniform lawn appearance and promotes healthy grass growth.
Even more power with minimal charging
The super-fast 180W charging time of just 45 minutes combined with a durable 3Ah battery allows you to mow your lawn smoothly and without unnecessary downtime. The ECOVACS GOAT A3000 LiDAR Robotic Lawnmower cuts 1,600 m² of lawn in a record 8 hours.
Mows just 5 centimetres from solid obstacles
If the mower approaches solid obstacles, such as a wall or fence, it will adaptively maintain the tightest possible distance from the edge. With the GOAT A3000 LiDAR Robotic Lawnmower, the cutting blades are only 5 cm from the edge, ensuring a thorough cut without wide strips of uncut grass at the edges.
Robotic lawnmower with stable navigation at all times
Whatever the conditions, the ECOVACS robotic lawnmower will navigate safely. This is achieved using 360° dual 3D LiDAR with a positioning accuracy of 2 cm. This pioneering technology requires no installation, is suitable for even the most difficult gardens and ensures great mowing results - every time.
Resistant to signal shielding
Fixed 3D ToF LiDAR and AI fisheye camera with 150° field of view, that the ECOVACS GOAT A3000 LiDAR is equipped with, ensure stable and accurate navigation even in the case of, that the satellite signals are shielded by the trees, high walls, by strong sunshine or thick clouds.
Intelligent mowing route planning
Thanks to intelligent route planning, the ECOVACS GOAT A3000 LiDAR robotic lawnmower cuts systematically and in uniform strips, ensuring that every blade of grass is precisely trimmed. In addition, U-shaped mowing increases the efficiency and speed of mowing, including better coverage of the entire area.
150° AI camera
The pioneering intelligent AIVI 3D technology enables the mower to avoid various types of obstacles intelligently and quickly. It combines an AI panoramic fisheye camera (with 150° of coverage) with 3D ToF LiDAR and artificial intelligence that reliably detects and reacts in real time to any obstacles in the mower's path.
Algorithm for external use
Thanks to a specially designed algorithm for outdoor use and artificial intelligence powered by the Horizon X5 chipset with 8-core CPU, the robotic lawnmower can detect and navigate around all objects commonly found outdoors, such as trees. This ensures smooth and safe mowing, even in the presence of your loved ones or pets.
Thorough edge cutting with TruEdge technology
Forget about the wide strips of uncut grass along your property boundaries. The ECOVACS GOAT A3000 Robotic Lawnmower uses 3D ToF LiDAR and an AI camera to continuously monitor the edges of the lawn, with AI ensuring a thorough edge cut at any cutting height. Thanks to AI Deep Learning, the mower can also distinguish between grassy and non-grassy areas in real time. It will also know whether it is safe to ride on the edge of the grass. On a slippery surface such as paving or concrete, the mower will run one wheel over a solid edge, so that not a single blade of uncut grass is left on the edges of the lawn.
Intelligent obstacle avoidance
The AIVI 3D intelligent obstacle avoidance technology ensures maximum safety when mowing day and night. Using artificial intelligence, an AI camera and 3D ToF LiDAR, the ECOVACS GOAT A3000 LiDAR robotic lawnmower can avoid all obstacles that could damage it, including living creatures it could injure, with pinpoint accuracy. Reliable detection of obstacles commonly found in the garden is made possible by artificial intelligence with a specially designed algorithm for outdoor use. In addition, you can easily set the height of obstacles that the mower detects using the mobile app.
The lawn-friendly GOAT A3000 LiDAR mower
The ECOVACS GOAT A3000 LiDAR Robotic Lawnmower cuts just a little bit of grass every day for a thicker, healthier lawn. Regular mowing produces very small grass cuttings, which are not collected by the robotic lawnmower but are evenly dispersed over the lawn. The leftover grass clippings then serve as a natural fertiliser that nourishes the lawn and restores moisture. Another advantage of mulching is that it produces no plant waste. The GOAT 3000 LiDAR is also very quiet.
Fully automatic mapping and cable-free boundaries
Thanks to SmartEdge technology, the mower can automatically and quickly detect the boundaries of your lawn, detect different types of borders and accurately record them on a map. There is no need to physically mark out the boundaries with perimeter cables or to walk around the boundaries with the robotic mower in hand. However, manual plot mapping is still available as an option on the GOAT A3000 LiDAR. You can easily switch between manual and automatic mapping mode at any time.
You can easily edit the parcel map
If the result of the automatic land mapping differs from your expectations, the map can be easily modified in ECOVACS HOME by adding, merging, splitting or removing areas. You can also set up several different paths for the GOAT A3000 LiDAR Robotic Lawnmower to move between areas. If necessary, you can also simply define restricted zones that the robot will never enter.
Customisable mowing with planning
You can use the app to virtually divide your garden map into up to 12 smaller areas. A range of settings can then be selected for each area, including speed, cutting height and direction, or the height of obstacles to avoid. The weekly mowing schedule then allows you to select areas to be mowed at the same time each day with the settings you choose, or you can schedule one-off mowing of specific areas at a time that suits you best.
The cutting discs follow the terrain perfectly
With a working width of up to 33 cm, the ECOVACS GOAT A3000 LiDAR Robotic Lawnmower's cutting blades rotate at up to 3,000 rpm, effectively cutting any type of grass. In addition, the blades are embedded in a floating frame, which allows the blades to follow the ground perfectly when mowing and leaves a beautifully smooth lawn. The floating attachment also increases the mobility of the mower when driving over uneven terrain and smaller obstacles such as small stones and sod. The floating frame also minimises the risk of accidental damage to the mower blades.
ECOVACS GOAT is weatherproof
The ECOVACS GOAT A3000 has a robust body with an IPX6 rating, so it doesn't mind being out in the rain. However, mowing in the rain is not safe and can damage your lawn. That's why the robot is equipped with a rain sensor, which automatically stops mowing when it detects raindrops and the robotic lawnmower returns to the station. When the rain stops, the mower automatically continues mowing where it left off. If you want to let the lawn dry out first, you can easily set a delay before starting mowing again using the app.
Smart Garden Keeper Smart Garden Keeper
The ECOVACS GOAT A3000 is more than just an ordinary robotic lawnmower. Thanks to the mobile app, the camera on the mower and the Smart Garden Keeper, you can see your lawn remotely at any time and in real time. In addition, the AI can also detect people entering your property and send you an immediate warning message. Whether you are at home or on the road, you can always be sure that your lawn is well looked after, including protection from uninvited guests.
Mowing that won't disturb you
Enjoy an efficient yet very quiet mowing. The noise level of the ECOVACS GOAT A3000 Robotic Lawnmower doesn't exceed 60 dB, so you won't even realise the robot is mowing near you when you're having a barbecue with your family or reading a book in the garden.
The mower can climb gradients of up to 50%
The ECOVACS GOAT Robotic Lawnmower easily and safely cuts slopes up to 50% (27°). High manoeuvrability and good manoeuvrability are provided by the 22 cm diameter rear all-terrain wheels together with the front all-terrain wheels. The large wheels also allow you to drive over kerbs up to a height of 3 cm.
Data Protection Certificate
ECOVACS is committed to keeping user data completely secure. All your data is reliably protected and will not be shared with any third parties, as confirmed by the TÜV Rheinland data protection certificate.
ECOVACS HOME application
Connect your lawnmower to the mobile app via Wi-Fi or Bluetooth and control it conveniently remotely. With the ECOVACS HOME app, you can easily start or pause mowing, send the robotic lawnmower to a station, adjust various settings or access the mowing history. You can also set the Do Not Disturb mode, the cutting angle and many other functions.The Goat A3000 LiDAR excels not only in high performance, but also in safe operation and easy maintenance
High mowing performance is guaranteed by the 3 Ah Li-Ion battery, which allows the mower to run for up to 45 minutes on a single charge and mow a lawn of up to 300 m². In case of low battery capacity, the robot will automatically return to the charging station. Fully charged and ready to resume work from where it left off, the mower will be up and running in just 45 minutes. The easy-to-access display controller on the top of the robot makes it easy to control the main functions of the mower. The ECOVACS Goat A3000 LiDAR also excels in easy maintenance - thanks to its IPX6 waterproof rating, you can turn it on its side and conveniently wash the lower part and the cutting disc with a garden hose. Clean the outer casing in the same way. There is also a lift sensor that ensures that if the mower is lifted off the ground or overturned while working, it automatically switches off. The mower is also protected against theft by a PIN code that you set when you first start it up. If the mower is stolen or goes outside the map area, it will automatically lock and sound an alarm. The manufacturer has also thought about the protection of nocturnal animals, so the robot will not mow between 19:00 and 7:00 the next day.
Package contents:
1× ECOVACS Goat A3000 LiDAR robotic lawnmower
1× charging station with fixing screws
1× power adapter and extension cable (5 m)
12× spare cutting blade
user manual
Specifications
Battery
Navigation
Technical specification
Features
Security
Compatibility
Packaging
| Code: | ECOhob016 |
| Links: | Producer's Website: |
| Manufacturer information |
PLAY electronics, s. r. o., Prielohy 1166/1D, 01007 Žilina, +421917499900, [email protected] 
|