KÖNNER & SÖHNEN Petrol generator KS 10000E 3 ATS

KÖNNER & SÖHNEN Petrol generator KS 10000E 3 ATS
The engine of the Könner & Söhnen KS 10000E 3 meets the latest EURO emission standards. It is one of the models that will provide power to both single-phase and three-phase appliances. On the power pack you will find the necessary 230 V and 400 V mains terminals. The Könner & Söhnen KS 10000E 3 ATS boasts a steel fuel tank with a practical fuel level indicator on both sides. You will appreciate the practical rubber feet that dampen vibrations and protect the floor from damage.

Key features of the KÖNNER & SÖHNEN KS 10000E 3 ATS petrol power pack
- Könner & Söhnen KS 10000E 3 ATS works on petrol
- Provide power to single-phase and three-phase appliances
- You will appreciate the safety fuses
- It boasts a built-in automatic ATS unit
- Meets the latest EURO emission standards
- Steel fuel tank for petrol
- Rubber feet dampen vibration
- You can see the operation information on the LED display
Power plant with automatic system
The Könner & Söhnen KS 10000E 3 ATS is equipped with a built-in ATS unit. This monitors the mains power supply and allows the generator to switch on automatically in the event of a power failure. Pwhen the main power supply is restored, the power station will switch off again. You will thus appreciate the Könner & Söhnen KS 10000E 3 ATS in buildings with strict temperature or light control in the absence of staff.
Easy starting of the Könner & Söhnen KS 10000E 3
The starting system of the Könner & Söhnen KS 10000E 3 ATS is very simple and starts immediately and effortlessly. The top of the range synchronous alternator with 100% copper winding contributes to reliable operation. It can withstand maximum loads without compromising operational reliability. The Könner & Söhnen KS 10000E 3 ATS boasts an ergonomic control panel for easy operation. The readable LED display shows the number of hours worked, frequency or output voltage.
Technical specifications
Voltage: 400 V
Max. performance: 8 kW
Rated power: 7.5 kW
Engine start: manual/electric/auto
Drawers: 1× Schuko 230 V, 1× CEE 400 V 16 A
Special features: built-in ATS, petrol
Fuel tank capacity (petrol):25 l
Oil tank capacity:1.2 l
Running time at 50% power:15 h
Engine model: KS 440 petrol, single cylinder, four stroke, air cooled
Output power controller: AVR intelligent voltage stabilization system
Dimensions:680 × 545 × 550 mm
Net weight:88 kg
Power factor, cosφ: 0,8
Frequency: 50 Hz
Current (max): 14,45 A
Fuel tank capacity: 25 l
LED display
Noise level Lpa (7m)/Lwa, dB: 71/96
Engine model: KS 440
Crankcase volume: 1,2 l
Protective class: IP23M
Specifications
Motor
Fuel
Sockets
Dimensions and weight
Features
| Code: | KONson04 |
| Warranty: | 24 months |