MARIMEX Pool Chemistry 7 Daily Tablets 4,6kg

Slow dissolving large tablets for continuous maintenance of the required chlorine level after using Marimex Start granules. Anti-fouling agent effective against algae, fungi, bacteria and viruses. The tablets are added via a skimmer, a dispenser built into the circulation pipe or a float with the filtering device switched on. These are tablets that dissolve on their own over a week, saving you time on ongoing pool care.

Instructions for use and dosage:
Before using chlorine tablets for the first time, always carry out a preventive treatment of the water with the fast dissolving chlorine product Start, Chlorine Stabilizer and adjust the pH value of the pool water to 6.8-7.2. Depending on the water temperature, 1-2 tablets per 30 m3 (30,000 l) of water are added every 5-8 days, 1 tablet up to a water temperature of 25 °C and 2 tablets up to a water temperature above 25 °C. In order to achieve crystal clear and permanently hygienic water, the pH value should be kept between 6.8 and 7.2 and the free chlorine content should be kept between 0.3 and 0.6 mg/l. If the free chlorine content falls below 0.3 mg/l, chlorine must be added, if higher than 0,6 mg/l, do not use the pool, limit the chlorine supply and wait for the value to fall within the specified range.
Application method:
Float:
Place the required number of tablets into the dosing float. Allow the float to move freely on the surface of the pool where there is more water movement.
Dispenser built into the circulation pipe:
Put the required number of tablets into the dispenser. Adjust the control valves of the dispenser so that the free chlorine content is approximately maintained.
Package contents:
23 pcs 200g tablets