Nails and Screws in a Tube 310ml ČS

Assembly, styrene-butadiene adhesive is designed for highly effective gluing and assembly of wooden sills, door frames or moldings. It is also suitable for gluing various types of profiles. It is easy to apply and hardens quickly . It excels in high adhesion to the bonded material and is structured down to a temperature of -15 ° C. It can replace nails and screws and is recoatable after curing. It reaches its maximum strength in 1 week, complete curing in 3 days.

Key properties of the product Nails and screws in the CS tube, 310 ml

• Assembly glue with a highly effective effect
• Suitable, for example, for the installation of wooden sills, profiles, moldings or door frames
• It is easy and effective to apply
• Beige thixotropic paste
• Structured in the temperature range -15 to 60 ° C
• Provides an extra strong connection and replaces nails and screws

Package contents:
310 ml

Final tensile strength of the joint:
15 kg/cm²

Thermal resistance after curing:
-15 to 60 ° C

Workflow:
The substrate must be clean, solid, free of dust and grease. The glue is applied to one side of the glued materials evenly in strips that are pressed together. When gluing polystyrene, it is applied in thin strips and allowed to ventilate for about 5-10 minutes. Then the glued parts are attached to each other.

Warning:
Not suitable for places permanently exposed to water. Do not use on substrates made of polyethylene, polypropylene, Teflon or resin. We recommend testing the product before use.