POOLSANA InverPower Green 13kW

New arrival 36,490,-

POOLSANA InverPower Green 13kW

POOLSANA InverPower Green 13kW heat pump uses Full Inverter technology, which continuously adjusts the compressor and fan speed to meet demand. It is suitable for in-ground and above-ground pools with a volume of up to 50m³. The titanium heat exchanger makes it fully compatible with both fresh and salt water and resistant to corrosion. In addition to heating water from 8–40°C, it also offers cooling and automatic defrost functions. An integrated Wi-Fi module combined with the Smart Life mobile app provides remote control and management of all functions.

Key features of the POOLSANA InverPower Green 13kW heat pump

  • Compatibility with above-ground and in-ground pools up to 50m³
  • Full Inverter technology with continuous power control
  • Heating output of 12.80kW
  • Coefficient of performance (COP) of 18.10
  • Heating, cooling and automatic defrost functions
  • Three power modes: BOOST, SMART and SILENT
  • Operating air temperature from -20°C to 45°C
  • Titanium heat exchanger compatible with fresh and salt water (up to 5g/L)
  • Eco-friendly R290 refrigerant with low environmental impact (GWP 3)
  • Control via digital display and mobile app (integrated Wi-Fi)
  • Operating noise level of 32–46dB(A)
  • Dimensions of 1080×470×715mm (W×D×H)
  • Weight of 69kg

Efficiency and power modes

The pump features three operating modes. BOOST mode uses full power for rapid initial heating. SMART mode automatically optimises performance to maintain the temperature. SILENT mode ensures quiet operation. The coefficient of performance (COP) is 18.10. The system uses eco-friendly R290 refrigerant, which has minimal environmental impact.

Design and operating conditions

The pump operates in outdoor air temperatures ranging from -20°C to 45°C and heats water from 8°C to 40°C. The steel casing protects internal components and meets the IPX4 rating, which safeguards it against splashing water from all directions. The recommended water flow rate through the exchanger is 5.3m³/h. Connect it to the filtration system using 50mm PVC pipework.

The recommended circuit breaker is 16A. When using the pump with salt water, the salt concentration must not exceed 5g/L.

Specifications

Type and destination

Technology type Invertor
Designed for Inground pool, Above-ground pool
Max. pool volume 50 m3

Performance and efficiency

Heating output 12.8 kW
Coefficient of performance (COP) 18.1

Operating conditions

Operating air temperature -20 °C
Min. water temperature 8 °C
Max. water temperature 40 °C
Water flow 5.3 m3/h
Power consumption 2.9 kW
Noise 46 dB
Power Supply 230 V

Features and equipment

Functions Heating, Cooling system, Automatic defrost
Equipment Timer, Display, Mobile application, Wi-Fi

Features

Heat exchanger material Titanium
Outer casing material Steel
Suitable for water Fresh, Salt
Colour Black
Weight 69 kg

Water connection

Connection type PVC piping
Connection diameter 50mm

Dimensions

Length 108 cm
Height 71.5 cm
Width 47 cm
Code:  POOLtep003
Warranty: 24 months
Manufacturer information

PoolSana GmbH & Co. KG, Vershofenstraße 10, 90431 Nürnberg, Německo, [email protected], www.poolsana.de

Show more