PU foam cleaner 500ml ČS

Return the functionality of your application spray gun with the PU foam cleaner. The highly effective product effectively removes uncured PU foam . The spray cleaner is made on the basis of organic solvents and dissolves quickly. It does not contain any CFCs or leaves an unpleasant sticky film.

Key features of the PU foam cleaner CS, 500 ml

• With PU foam cleaner, your application gun will regain its full functionality
• The highly effective product removes PU foam residues very quickly
• Based on organic solvents
• It does not contain any freons
• After application, the composition does not leave an adhesive film on the cleaned surface
• It is very easy to use

Volume:
500 ml

Consistency:
spray liquid

Workflow:
NBS gun cleaning: Unscrew the used can of polyurethane foam gun from the NBS pistol (keep the opening of the empty can from the body). Shake the can with the cleaner well. Screw the cleaner onto the NBS gun. Press the trigger to fill the gun with cleaner. Leave on for 10 - 12 minutes. Press the trigger and refill the gun with cleaner. The gun is clean when a clear cleaner flows out of its nozzle. Wipe off excess cleaner with a cloth. We recommend treating the NBS pistol adapter with silicone spray. By screwing in a new can with PU foam gun and filling the inside of the gun, the remnants of the cleaner are removed and the gun is ready for storage or further use.
Cleaning other items: place the spray adapter on the nozzle of the cleaner valve. Press the shutter button to start the system. Apply from a distance of about 25 - 35 cm.

Warning:
Does not remove cured PUR foam. Do not use in enclosed or poorly ventilated areas. Do not use on materials that are not resistant to polar organic solvents (polystyrene, etc. ) ). Never wash or disassemble the spray gun after using the PU foam cleaner. Do not remove already hardened polyurethane foam with sharp objects. We recommend testing the product before use.