Hydrogen-1 Glass hydrogen water generator 400ml, glass bottle - white
Hydrogen-1 Glass hydrogen water generator 400ml, glass bottle - white
The Hydrogen-1 hydrogen water generator produces water with high hydrogen concentration from 900 ppb to 2800 ppb. The high-end SPE electrode and PEM membrane only supplies pure hydrogen to the water and waste substances such as ozone and chlorine do not enter the water (do not pass through the membrane). With older and cheaper electrodes that are not separated by a PEM membrane, waste substances (mainly chlorine and ozone) enter the water and make it unsafe to consume - bottles without an SPE/PEM membrane can only be safely used with distilled water - but this is not suitable for long-term consumption.
Key Features of Hydrogen-1 Glass Hydrogen Bottle - 400 ml - White
- SPE technology (Korean platinum coated titanium) with PEM membrane
- High quality Japanese membrane, no ozone and chlorine in the water
- Hydrogen up to 900 ppb up to 2800 ppb 1800 mAh high-capacity battery (approx. 40 × 3 min. cycles = 16 litres of water)
- USB-C power cable
- Bottle made of borosilicate glass (Hydrogen-1 version has a bottle made of Tritan - food-grade plastic)
- 3 minute mode, 10 minute mode, self-cleaning mode
- Tubing for inhalation
- Spectacular LED backlighting
Perfect generator features
The generator can be screwed onto a PET bottle, the package includes an adapter for a thread common in Czech PET bottles. There is a 30mm thread directly on the bottle (wider thread, e.g. Evian water bottles). Hydrogen water can therefore be produced for travel without the need to carry a generator including a glass bottle and lid. The low consumption together with the high-capacity 1800 mAh battery is sufficient for approx. 8-16 litres of molecular water per charge (depending on the program used).
How to use a hydrogen generator
Press the button once: mode for 3 minutes, Press the button 2 ×: mode for 10 minutes, Press the button for 3 seconds: self-cleaning mode. When the hydrogen water generator is working, press the button once, it will stop working. Hydrogen concentration in the bottle: - 3 minute mode after one cycle: 900ppb ~ 1200ppb; - 10 minute mode after one cycle: 1500ppb ~ 1800ppb; - 10 minute mode 2 cycles: 2000 ppb ~ 2800 ppb. Do not exceed 3 10-minute cycles, this could result in too much hydrogen concentration and overpressure in the bottle. Suitable for use with drinking water only. The bottle must not be used with carbonated, hot, flavoured or mineral water.
Technical parameters
Bottle capacity: 400ml
Dimensions : 67 mm (width) × 225 mm (height)
Power: USB-C
Bottle weight: 540 g
Scope of hydrogen production: depending on the number of cycles from 900 to 2500 ppb. ScopeORP: -500 mV ~ -650 mV
PH value: 7,5-9,5
Bottle material: Glass, electrode material: platinum-coated titanium
Membrane: Proton Exchange Membrane (PEM) technology, origin: Japan
Hydrogen production technology: SPE
Contents of the package: Bottle, inhalation tube, charging cable, instructions, PET bottle adapter
Package contents
- Bottle
- Tubing for inhalation
- Charging cable
- Instructions
- Adapter for PET bottle
Specifications
Volume
Sports
Material
Dimensions
Colour
Features
Redox potential range
Hydrogen concentration
Dimensions and weight
Material
Colour
Included
| Code: | UVlhv02 |
| Warranty: | 24 months |
| Manufacturer information |
UVtech s.r.o., Roháčova 2572, 39701 Písek, [email protected], www.uvtech.cz 
|