iGET SECURITY P11v2 - wireless outdoor siren (battery/adapter)

The iGET SECURITY P11v2 wireless outdoor siren is an optional accessory for iGET SECURITY M3B and M2B alarms. The siren is used outdoors and can be placed up to 80 metres from the main unit. Power supply is provided by a 230 V AC/12 V DC 0.5 A mains adapter or by 4 LR20 batteries. In the event of an alarm, an emergency tone of 100 dB is activated and the bright red LEDs located on the front of the device light up at the same time. The siren has an anti-sabotage protection, the moment the rear tamper (safety button) is activated the alarm is triggered.

Manufacturer's Note:
The siren responds immediately, without delay. It cannot be used with a delayed alarm setting. When using this siren it is necessary to control the alarm using key fobs, i.e. activation/deactivation takes place immediately. Therefore, it cannot be used in a delayed detection zone since the alarm is raised immediately, not after the countdown to enter the code is over.
Broadcast frequency: 433 MHz
Operating temperature:
-20 °C ~ +50 °C
Operating Humidity:
5 % ~ 95 %
Encoding used:
2262/1527

Supply voltage:
Power adapter or battery
Power supply using the included adapter:
Input: 230 V AC, output: 12 V DC 0.5 A
Powered by batteries not included:
4 pcs 1.5 V LR20
Signal range to the central unit:
up to 80 m in direct visibility