iNELS Universal dimmer, 1 channel RFDEL-71B-SL
iNELS Universal dimmer, 1 channel RFDEL-71B-SL
The iNELS lighting dimmer can be combined with iNELS RF Control detectors, controllers or system elements. The BOX version offers installation directly into the installation box, ceiling or luminaire housing. For elements marked as iNELS RF Control2 (RFIO2)it is possible to set the repeater function via the RFAF/USB service device. Range up to 200 m (in the open), in case of insufficient signal between the controller and the element, use the RFRP-20 signal repeater or elements with RFIO2 protocol that support this function.
Key features of iNELS RFDEL-71B-SL universal dimmer, 1 channel
- 7 light functions - continuous start or stop with time setting 2 s-30 min. + additional function SWITCH OFF
- Setting min. brightness to eliminate flickering of LED and ESL light sources
- Universal dimmer can be controlled by up to 25 channels
- Control input "S" for connection of existing wired button
- The programming button on the element also serves as a manual output control
- Communication frequency with bidirectional iNELS RF Control2 (RFIO2) protocol
Compatible with the manufacturer's app
To use the product's smart features, you need to add the device to the manufacturer's app. For more information about the application (name, supported OS, supported languages) and how to add a device to the application, please refer to the product manual.
Universal built-in dimmer is used to control light sources:
R - classic bulbs
L - halogen lamps with winding transformer
C - halogen bulbs with electronic transformer
ESL - dimmable energy saving lamps
LED - LED light sources (230V)
Technical Specifications:
Supply voltage: 230 V AC / 50 Hz
Frequency of supply voltage: 50-60 Hz
Apparent power: 5 VA / cos φ = 0.1
Power loss: 0,5 W
Supply voltage tolerance: +10/-15 %
Connection: 4-wire, with "ZERO"
Dimmed load: R, L, C, LED, ESL
Contactless: 2× MOSFET
Load capacity: max. 300 W
Wirelessly: up to 25 channels (buttons)
Communication protocol: RFIO2
Frequency: 866-922 MHz
Range: up to 200 m
Manual control: PROG (ON/OFF) button
Operating temperature: -15 to +45 °C
Working position: Any
Fixing: loose on supply wires
Coverage: IP40
Overvoltage category: III.
Degree of pollution: 2
Connection: screwless clamps
Cross section of connecting wires (mm²): 0,2-1,5 mm² solid/flexible
Dimensions: 43 × 44 × 22 mm
Weight: 30 g
Related standards: EN 60730, EN 63044, EN 300 220, EN 301 489
Specifications
Connection
Connectivity
Use
Type
Location
Features
Dimensions
| Code: | INEstm0002 |
| Warranty: | 24 months |
| Links: | Producer's Website: |
| Manufacturer information |
ELKO EP, s.r.o., Palackého 493, 769 01 Holešov, Všetuly, [email protected], www.elkoep.cz 
|