LEGRAND UPS Keor SP 600VA/360W

You've probably already experienced the nightmare of a power supply interruption a few seconds before your work was about to be automatically saved. Almost all your work has vanished, and you must start from scratch. Such tragic scenarios can be warded off by the LEGRAND UPS Keor SP 600VA/360W backup power supply. This is a battery reservoir that powers all devices that need electricity. The LEGRAND UPS Keor SP 600VA/360W UPS battery backup uses the Line interactive design approach. Off-line is the most basic form in case of a outage because it switches to the internal battery for electric power. The line interactive UPS enhances the simpler off-line version of voltage regulation to guard against dangerous surges travelling along data lines.

LEGRAND UPS Keor SP 600VA/360W Backup Power Supply Key Features

• Backup power supply type: Line interactive
• Actual performance: 360 W
• At a 100% load, the UPC will work for 1 min
• 4 sockets (C13), as used for monitors, printers, or amplifiers

The most important attribute is the backup time. This is governed by the energy consumption – for example, at half-load (50%), the battery backup time will be three times longer. The load of the backup source defines the operating time, which at full load (100%) is 1 min and at half-load, it's 8 min. It is therefore necessary to determine the energy consumption of the connected electronics and it is a good idea to have a bit of energy extra left. The LEGRAND UPS Keor SP 600VA/360W specifies the apparent power as 600, but realistically, the actual power usage is 360 W.