Netgear WAG102EU ProSafe Dualband

Excellent access point to ensure the creation or expansion of wireless networks at home and small business, where each device can communicate with the radio 2.4 GHz and 5 GHz. Communication will happen with the support of Wi-Fi 802.11g, which is in turbo mode, reaching up to 108 Mbit/s data rate.
Access Point with WDS supported technology is able to operate in several modes, which falls into the bridge, while the signal's gain to a separate network segment. It can also be configured as a bridge while working an access point. Its installation is possible even in places where there are electrical outlets. You can easily power over ethernet distribution using the classical a UTP cable. Extensive coverage provide two detachable antenna with 5 dBi sensitivity. Wired router or switch is in the direction of the LAN port.
A reliable security network created to take care of virtually unbreakable WAP2 encryption, MAC address filter, support for RADIUS authentication server, VPN pass-trough for the transmission of sensitive private data, multiple SSID and VLAN. The access point is configured through an intuitive Web browser on any operating system. For managing and monitoring network will be well served SNMP network protocol. Device is supplied with power adapter and Ethernet cable.
Parameters and specifications:

Wireless network:
IEEE 802.11a/g (2.4GHz/5GHz)
IEEE 802.3af PoE (Power over Ethernet)
WDS
Application:
AP (access point)
Bridge (Bridge)
Repeater (repeater)
Security:
WEP (64/128/152bit)
WPA2
IEEE 8021x RADIUS with EAP TLS, TTLS, PEAP
MAC address filter
VPN pass-through
Multiple SSID (16)
Block SSID
VLAN
Administration:
SNMP MIB
Interface:
1x 10/100 Mbps LAN (RJ-45) with PoE support
2 x reverse SMA
Output power:
16-19 dBm
Consumption:
8.5 W (via PoE)
Dimensions:
32 x 190.5 x 122 mm
Weight:
620 g
Package Contents:
UTP cable
User's Guide with CD
Power adapter
Compatible operating systems:
Microsoft Windows 98/2000/ME/XP