Reviews MSI MAG VAMPIRIC 011D AMD Edition
Interested in reviews of MSI MAG VAMPIRIC 011D AMD Edition? It got 4.6 out of 5 stars from our customers. Find specific customer reviews of MSI MAG VAMPIRIC 011D AMD Edition below. We will appreciate if you also share your experiences with MSI MAG VAMPIRIC 011D AMD Edition after purchasing.
MSI MAG VAMPIRIC 011D AMD Edition
Discontinued
David, Zdice/Knížkovice
Rated 07/07/2023, variant MSI MAG VAMPIRIC 011D AMD Edition
Verified purchase
still holding no problem
0 ×Report
Filip, Janovice
Rated 13/02/2023, variant MSI MAG VAMPIRIC 011D AMD Edition
Verified purchase
It looks very nice
Cannot mount Arctic Liquid Freezer II 360 on the front with the hoses down. If you put the radiator in there, there is about 1 cm of space between the front side where you attach the radiator and the cutout on the sheet metal under which you put the power supply and you can't put the hoses there. For an idea of the photo, just with the hoses up.
0 ×Report
Customer, Dolní Řasnice
Rated 31/01/2023, variant MSI MAG VAMPIRIC 011D AMD Edition
Verified purchase
Beautifully transparent
A little (except for the table)
Price (at the time of purchase it cost about 1500, -)
Beautifully backlit
Cable-management (it's a bit hard)
The water cooling has to be attached from the front in a bad way (you have to remove the front panel)
0 ×Report
Michal, Sobotka
Rated 25/01/2023, variant MSI MAG VAMPIRIC 011D AMD Edition
Verified purchase
size
It's a beautiful place to build in
ČZM fan
AMD edition 😃
PCIe breakaway covers
no holes for audio USB cables for mATX boards
0 ×Report
Jindřich, Praha 9 - Kyje
Rated 24/01/2023, variant MSI MAG VAMPIRIC 011D AMD Edition
Verified purchase
Decent LED effects on the mask.
The price corresponds to the quality.
Spacious case, but unscrew the 3.5" drive box before installing the power supply with cables.
The back tabs are really breakaway and only go inside, so be careful not to scratch the board like I did. Fortunately, the board held up.
The sheet metal of the rear end caps is very soft, so when you remove the caps, the horizontal bulkheads can warp and you have to flatten them.
The top ventilation grille makes the case less soundproof than older case types, so if you want a quiet PC, reach for something else.
The side glass needs to be held well during handling. There is no "paw" or "rant" underneath.
On the metal structure on the holes for the screws of the glass sidewall there are glued small rubber pads so that the glass is not directly on the metal. The pads didn't even last the first time I took the sidewall off, they peeled right off. I guess it doesn't matter too much considering the price range of this case.
SSDs are mounted on a metal plate that needs to be unscrewed. The screw is turning, so you have to help yourself with a screwdriver or a second screwdriver to get the screw out. When unscrewing, the thread gets damaged and then the screw doesn't hold much. But the worst part is that if you have the crate just laid on its side, metal filings attack the backing board! The problem is with the two positions for these disks.
0 ×Report
Jiří, Česká Lípa
Rated 23/01/2022, variant MSI MAG VAMPIRIC 011D AMD Edition
Verified purchase
Spacious, nice looking and easy to connect.
The back of the compartment for graphics etc is breakaway, so if you make a mistake there will be a hole. It won't go back on.
0 ×Report
Milan, Varnsdorf
Rated 25/01/2021, variant MSI MAG VAMPIRIC 011D AMD Edition
Verified purchase
price
Design
I don't have
0 ×Report
Customer
Rated 02/01/2021, variant MSI MAG VAMPIRIC 011D AMD Edition
Verified purchase
Tempered 4mm side glass, top fan placement variability, front panel for AMD Ryzen fans, HDD and SSD placement.
Not enough screws for 3pcs front 140mm fans (8pcs in the package) and they are about 3-5 mm shorter than they should be (Artic 140 PWM)-there are no damping washers. RGB HUB should not be glued by the manufacturer, let the buyer put it where it suits him. The front mounting of the fans should be designed in a similar way to the top mounting.
0 ×Report