Satellite Converters (LNB)

Satellite converter (hereinafter referred to as LNB) are arranged at the focal point of a parabolic antenna. The device receives a signal from the satellite, amplifies it and converts it to a lower frequency. The converted signal is further processed and transferred to the satellite receiver via a coaxial cable.

Continue

Number of outputs for receivers:

With output for 1 receiver (single LNB)
For two receivers - tuners (Twin LNB)
For up to four receivers - tuners (Quad LNB)
For up to 8 receivers - tuners (Octo LNB)
Special LNB Quattro - Designed exclusively for connection with the multiswitch. Use it in large installations with a large number of receivers, eg. In residential buildings. This type of LNB is not designed for direct connection of receivers.

LNB Monoblock

receives signals from the two satellites at once
Fixed reception for the most common satellites 19.2°E (Astra 1) + 23.5°E (Astra 3)

Other features

Noise figure (reported in dB) - the smaller the value, the better the converter will control the received signal. The noise figure is already below 0.3 dB quite sufficient for the standard reception
Multifeed - You can receive multiple LNB signals with only one dish

LNB Mascom Monoblock Single MCM4S01HD Gold 4.3°

104×

399,-

In stock > 5 pcs

Converter - diameter: 40mm, 1 participant

Added to cart

- +

LNB Mascom Monoblock Twin MCM4T01HD Gold 4.3 °

40×

899,-

In stock 4 pcs

Converter - Diameter 40mm, 2 participants

Added to cart

- +

Monoblock Quad LNB Mascom MCM4QS01HD Gold 4.3°

32×

1,099,-

In stock 2 pcs

Converter - diameter 40mm, 4 participants

Added to cart

- +

Mascom MCS01UHD Single LNB 0.1dB

95×

119,-

In stock > 20 pcs

Converter - diameter 40mm, 1 participant

Added to cart

- +

LNB Mascom Monoblock Single MCM4S01HD Gold 4.3°

104×

359,- New 399,-

As good as new - in stock 1 pcs

Converter - diameter: 40mm, 1 participant

Added to cart

- +

Nedis ACON2510BK

1×

434,- Save 215,-

In stock 1 pcs at the supplier's

Converter - for converting digital audio signal to analog audio signal, possibility to connect devices with TosLink optical output, headphone jack, LED indicator, power adapter...

Added to cart

- +

Tesla Excelent Monoblock Single

320,-

In stock > 5 pcs at the supplier's

Converter for reception of 2 satellites 4.3degrees, LTE filter, range 10.7 - 1.75GHz, noise figure 0.1dB, 59dB gain, Slim design, Teflon protection, gold-plated F connector,...

Added to cart

- +

Mascom MCQS01HD Quad LNB 0,1dB

32×

449,-

Currently Unavailable

Converter - 40mm diameter, 4 participants

View

Mascom MCT02HD Twin LNB 0.2dB

62×

289,-

Currently Unavailable

Converter - diameter: 40mm, 2 members

View

Televés Twin LNB 0,3dB LTE Ready

8×

359,-

Currently Unavailable

Converter - twin LNB, low noise figure, high conversion gain, for HDTV and UHDTV reception in DVB-S2, LTE filter, F connectors

View

Satellite Converters (LNB) - additional info

LNB (Low Noise Block) is a device for receiving the high-frequency satellite signal from a satellite, the signal being amplified and converted to a lower frequency. The signal then passes to the satellite receiver, via a coaxial cable with an F-connector, which transmits the digital image and sound to the TV.

Continue

Quality of the satellites

Satellite converters are placed at the focal point of the parabola, of a satellite antenna. For offset dishes that dominate the market, for the best possible reception of the satellite signals, the converter is not placed centrally. The quality of the LNB determines the noise figure (in dB), for which the lower it is, the better the received signal. If you want to connect several satellite receivers, select a converter with the appropriate number of outputs. The companies Maximum , Inverto , Zircon , Mascom or even Smart offer converters.

Satellite Converters (LNB)

Number of outputs for receivers:

LNB Monoblock

Other features

Satellite Converters (LNB) - additional info

Quality of the satellites

No longer sold

Try our cookies