SINOP Base stream PLUS
SINOP Base stream PLUS
The BASE STREAM soda maker is designed for cooling and carbonating drinking water with CO₂ or O₂. The Base stream PLUS is designed to be placed under a worktop or built into cabinets or kitchen units. This type of soda maker is then connected to a dispensing tower, which can also be combined with a water tap. To operate the Base stream, you also need to purchase a dispensing tower. It uses R134 as a refrigerant. The evaporator and bellows are made of stainless steel. The water and CO₂ inlets are on the back of the appliance. The main switch, power cable connector, and thermostat dial are located on the front. The Base stream appliance vents from the bottom, so for it to function correctly when built-in, you must provide a ventilation opening in the base plate or remove the intake cover. The water temperature can be adjusted from 5–12°C using the thermostat. The appliance is equipped with pump protection against running dry. This protection disconnects the pump if the water supply is interrupted to prevent damage.
Key features of the SINOP Base stream PLUS soda maker
- Dry-flow cooling with soda water production
- Can be built into furniture or under a counter
- Connects to a wide selection of taps and towers
- Robust construction
- Adjustable water temperature
- Pump protection against running dry
To connect the soda maker, you will need:
Water supply – connection to a tap with a 1/2" thread (ideally within 5m of the soda maker), incoming water must meet pressure and quality criteria
CO₂ gas – pressure cylinder
Electricity – a standard electrical socket (within 1.5m of the soda maker)
Cooling capacity:
35L/h
Cooling compressor output:
1/5HP
Dimensions:
447×278×428mm
Weight:
23kg
Specifications
Power outlet type
Manufacturer's features
Colour
Dimensions and weight
| Code: | SISOBA005 |
| Warranty: | 24 months |