INPRODUCTS Shoe impregnation 200 ml

With INPRODUCTS nano shoe impregnation you will reliably protect your textile, suede and membrane shoes from moisture and dirt. Silicon nanoparticle layer repels water, maintains breathability and prevents destruction from salt spray. Shoe impregnation will keep your feet comfortable and warm in every situation. During autumn splashes and trekking in the rain and mud. Thanks to the spray, the solution is easy to apply and even in extreme conditions the impregnation is effective for up to three months. With the impregnation, it protects your current textile footwear (sneakers, cloths), shoes made of natural leather, suede shoes, sports and membrane footwear (boots, soccer shoes, trinkets). Water is the basis of shoe impregnation. This makes the spray colourless and completely odourless. In addition, the impregnation is completely safe for your health and you can use it safely even in enclosed spaces.

Silicon layer maintains water resistance and breathability

Silicon nanoparticles increase the resistance of natural leather, textiles, Gore-Tex membranes and suede against dirt and water penetration. Spray restores breathability while maintaining the properties of membrane fabrics. Your shoes will still serve you perfectly, and they will also be protected against moisture. The silicon layer of nanoparticles allows the fabric to be cleaned of salt and sweat during washing. After drying, the function of the nanoparticles is restored. The impregnation for suede shoes and shoes made of other materials lasts up to 10 washing cycles with water and up to 5 cycles with washing powder.
Expiration date:
Min. 4 years from date of manufacture
Volume:
200 ml
Consumption:
25 to 100 ml per 1 m² (depending on the absorption properties of the material)
Use:
Apply the solution in a continuous layer from a distance of 10 to 20 cm. When applying to non-absorbent material, spread the solution over the shoe with a sponge. After application, wait 24 hours - during this time a protective silicon layer will form on the surface. During drying, place the object to be treated in a ventilated area and out of sunlight.
Storage:
Store the solution container at temperatures between 3 and 30°C and out of direct sunlight.