Naturehike ultralight tent Mongar 2 15D, sand
Naturehike ultralight tent Mongar 2 15D, sand
The Naturehike Mongar 2 15D is an ultralight, double-skin tent for two people, designed for trekking and lightweight expeditions. The 2025 UL version combines the proven design of the Mongar model with lightweight materials. Two separate entrances allow independent access to the sleeping area, and two vestibules provide space for storing gear. Two vents promote cross-ventilation.
2
Capacity
1500mm / 5000mm
Water column rating flysheet / groundsheet
110 × 220 × 240cm
Tent dimensions (H × W × D)
Double-skin
Number of skins
1.67kg
Weight
Key features of the Naturehike Mongar 2 15D tent, sand
- Lightweight 2025 UL version of the Mongar tent
- The Naturehike Mongar 2 15D tent offers 2 separate entrances and 2 vestibules
- Two vents ensure air circulation
- Flysheet made of 15D siliconised nylon
- Raised edges on the inner tent made of 20D nylon
- Groundsheet made of 210T polyester with a triple grid
- 8.5mm YUKSON aluminium poles
- Extended storage areas on both sides
- Internal stabilising guy line
- Additional footprint allows for shelter setup
Lightweight materials of the Naturehike Mongar 2 15D tent
The flysheet of the Naturehike Mongar 2 15D tent is made of 15D nylon with a silicone coating on the outside and a waterproof PU coating on the inside. The raised edges at the head and foot areas use 20D nylon with a double grid and silicone coating, while the remaining parts of the inner tent are made of 15D nylon and insect-proof mesh. The 210T polyester groundsheet with a triple grid increases resistance to moisture and abrasion. The structure is supported by 8.5mm diameter YUKSON aluminium alloy poles.
Practical features and versatile setup
Extended storage areas on both sides of the tent keep small gear accessible inside the Mongar 2 15D. The outer corners are designed for a tighter pitching of the groundsheet, and the internal guy line can be used to reinforce the structure or as a drying line. An additional footprint protects the integrated groundsheet from dirt and wear. By combining the additional footprint, poles, and flysheet, you can pitch a standalone shelter without the inner tent.
Additional information
- Inner tent dimensions: 210 × 130 × 105cm
- Packed tent dimensions: 15 × 41cm
- Inner area: 2.73m²
- Vestibule area: 1.21m²
- Full package weight: 1.91kg
- Weight of additional footprint including bag: 238g
- Material of additional footprint: 210T polyester
- Water column rating of additional footprint: 5000mm
- Colour: sand
Accessories
- 1× flysheet
- 1× inner tent
- 1× set of tent poles including bag
- 12× pegs including bag
- 4× guy line
- 1× additional groundsheet including packaging
- 1× travel case
- 1× compression strap
Water column
Indicates the resistance of the fabric and seams to water penetration. It specifies the amount of water the material can hold before it starts to leak. The higher the value in mm, the more resistant the tent is. Every tent should have a flysheet with a water column of at least 2000mm, which is approximately the pressure exerted by a raindrop travelling at 80–90 km/h. To survive a storm unscathed, a water column of at least 3000mm is a safer bet. For the groundsheet, a water column of 5000mm is recommended for general hiking. For more demanding conditions, choose a groundsheet with a water column of 8000–10000mm.Specifications
Type
Tent pitching
Features
Unpacked dimensions
Packed dimensions
Accessories
| Code: | SPTnatursta05 |
| Warranty: | 24 months |
| Links: | Producer's Website: |
| Manufacturer information |
FOR X-TREME DISTRIBUTION s.r.o, Čisovice 128 252 04, [email protected], +420725055051 ProCode s. r. o. Josefy Kolářové 376/11, 370 005 České Budějovice, [email protected], +420 601 539 688 
|