NIKWAX TX. Direct Spray-on 300 ml

NIKWAX TX. Direct Spray-on is an impregnating spray designed for impermeable breathable fabrics. The impregnation increases the water resistance of the material while maintaining its breathability. It is suitable for ballasts, Gore-Tex, Ultrex, SympaTex, PermaTex, Nikwax Analogues, Entrant, eVENT, PTX and other similar materials. It is water-based, non-flammable, non-toxic and carbon dioxide-free. NIKWAX TX impregnation. Direct Spray-on is delivered in a container with a mechanical sprayer, which ensures easy application and allows targeted treatment of the most stressed parts of the garment.

Instructions for use:
For best results, remove all parts not suitable for washing and wash in Nikwax TechWash in a separate wash cycle before impregnating. There is no need to pre-dry the garments. Shake well before use. Respect the symbols on the product.
Applications:
1. Spread clean wet clothing evenly.
2. When applying, hold the bottle approximately 15 cm from the treated garment.
3. Apply evenly to the outside of the garment.
4. Allow to absorb and after two minutes remove excess with a wet cloth.
5. Check carefully that you have not missed any place on the garment being treated.
Drying:
Leave to hang freely (check after a few minutes and remove excess with a wet cloth) or tumble dry at a low temperature if the symbols on the garment allow it.
Quantity needed:
With this pack you can impregnate one to two pieces of clothing. It depends on the condition of the garments being treated.
Approximate consumption of impregnation:
Jacket - 250 ml
Protective suit - 400 ml
Protective pants - 150 ml
Covers - 70 ml