NITECORE EDC23
NITECORE EDC23
NITECORE EDC23 is a powerful LED torch with integrated charging, offering a maximum light output of up to 2500 lumens, a beam distance of up to 280 metres, and a beam intensity of 20720 candela. The torch is equipped with an OLED display that shows important operational data – current brightness level, light output in lumens, battery voltage, estimated remaining runtime, and charge status. It is controlled using ON/OFF buttons for switching on and off, and a MODE button for switching between modes. The built-in 1500mAh Li-ion battery is recharged via the USB-C connector directly on the torch. The torch's construction features a durable stainless steel body with a titanium finish, ensuring high resistance and a modern look.
2500 lm
Luminous flux
280 m
Maximum beam distance
Rechargeable battery
Power source
Steel
Material
Key features of the NITECORE EDC23 LED torch
- LED torch with integrated charging
- Maximum luminous flux up to 2500 lumens, beam distance up to 280 metres
- Equipped with an OLED display showing brightness level, light output in lumens, battery voltage, estimated remaining runtime and charge status
- Controlled by ON/OFF buttons for switching on/off and a MODE button for switching modes
- Advanced Temperature Regulation (ATR) protects the electronics and battery from damage
- Built-in 1500mAh Li-ion battery
- Recharges via the USB-C connector
- Made from stainless steel with a titanium finish
- The NITECORE EDC23 torch is equipped with a practical clip and a paracord lanyard with a carabiner
Easy control of the NITECORE torch
The ON/OFF button is used to switch both constant and momentary light on and off. The MODE button switches between 5 light modes and strobe. You can select the desired light intensity based on the required runtime and beam distance. The highest Turbo mode offers a light output of 2500 lm with a beam distance of up to 280m, but it is intended for short-term use. The High mode provides 1100 lm for approximately 1.30h with a range of 185m. The Medium brightness level of 200 lm lasts for approximately 3.45h and has a beam distance of 90m. The Low mode with 65 lm offers a runtime of up to 11h and a beam distance of 50m. The lowest light level is 15 lm, with a runtime of up to 39h and a beam distance of 24m. The button is two-stage; a partial press activates Turbo mode, and a full press activates a variable strobe, which is ideal for signalling or self-defence.
Torch features
The NITECORE EDC23 torch is equipped with a practical clip, which you can use to hang it on your belt or pocket. You can also use the paracord lanyard with a carabiner. The integrated 1500mAh battery is charged directly in the torch via the USB-C port without needing an external charger. The reversible connector is a practical and convenient solution.
ATR temperature regulation
The Advanced Temperature Regulation (ATR) ensures that the NITECORE EDC23 torch automatically reduces its output when it gets too hot to prevent overheating. If it becomes too hot during operation, the system automatically reduces the LED output, which lowers the temperature. ATR protects the electronics and battery from damage.
Additional information
- Max. runtime 39 hrs
- Light colour - white light
- Water resistance according to IP54 standard
- Weight 101g
Accessories
- Built-in 1500mAh battery
- USB - USB-C charging cable
- Multi-purpose clip
- Paracord lanyard
Luminous flux
Measured in Lumens (lm), the higher the value, the more intensely the headtorch shines. Some LED headtorches offer multiple brightness levels, adjustable either in steps or continuously. However, a higher luminous flux shortens the battery life.Up to 100 lm – headtorch for home use (lighting in the cellar, loft, or when repairing a car).
100–400 lm – outdoor use (night running, cycling, camping).
Over 400 lm – extreme professions and sports (rescuers, mountaineers).
Specifications
Features
Power Supply
Construction
Features
Dimensions and weight
Colour
Packaging
| Code: | SPTnitc010 |
| Warranty: | 24 months |
| Links: | Producer's Website: |
| Manufacturer information |
EUROLAMP s.r.o. , Topolová 1418 , 684 01 Slavkov u Brna, +420 545 215 712, [email protected] 
|