Secutek SST-001 - 8MP, IP54
Secutek SST-001 - 8MP, IP54
The Secutek SST-001 - 8MP photo trap is used to monitor the movement of wildlife and to secure areas. It offers several recording modes. It can take photos, record video, or first take a photo and then start recording video according to the parameters you set. The photo trap operates in timelapse mode, in which it automatically takes time-lapse photos or videos at set intervals. It is also possible to set a timer, i.e. a time range in which it should be active. The Secutek SST-001 can be secured with a password.
Key features of Secutek SST-001 - 8MP, IP54
- It is used to monitor the movement of wildlife and to secure areas
- The photo trap offers several recording modes
- It can take a photo, record a video or first take a photo and then start recording a video according to set parameters
- Works in timelapse mode - automatically takes time-lapse photos or videos at set intervals
- It is equipped with a timer
- It is possible to set the time range in which the photo trap should be active
- Takes photos up to 5 MP and video up to HD (1280 × 720 px)
- It is equipped with 30 infrared LEDs that illuminate the night scene up to 12 meters away
- The PIR sensor activates the photo trap if it detects movement in its surroundings
- Recordings are stored on an SD card with a maximum capacity of 32 GB
- The Secutek SST-001 photo trap can be secured with a password
The Secutek photo trap has 30 IR LEDs that illuminate the night scene
The Secutek SST-001 photo trap is equipped with a camera with a 90° angle of view, captures photos up to 5 MP and video up to HD (1280 × 720 px). With 30 infrared LEDs that illuminate the night scene up to 12 meters away, it is possible to use the photo trap even at night. The device is equipped with a PIR sensor that activates the photo trap if it detects movement in its surroundings. The sensor occupies a 90° angle and has adjustable sensitivity. RThe activation speed is 1.1 seconds.
The recordings are stored on the SD card
Photos and videos are stored on an inserted SD memory card with a maximum capacity of 32 GB. The photo trap is not equipped with a built-in display and its settings are made by connecting to a PC using the included USB cable. The photo trap appears as a removable disk containing the MMSCONGIF software. When you open the software, you can change the settings for language, operating mode, photo and video resolution, timer and sequential shooting settings, date and time, etc.
Easy to install and use
The Secutek SST-001 is powered by four AA batteries and can run for up to 3 months on one set of batteries. Other power supply options are solar panel (6V) or external adapter (DC 6V). The use and installation of the photo trap is very easy and its camouflaged appearance allows for hidden installation. The photo trap can be attached to the desired location using the supplied strap or attached to a tripod or mount using the 1.4" thread.
Specifications
Weight
Recording quality
Camera resolution
Video resolution
Sensor range
IR light
Features
Power supply
Packaging
Dimensions
| Code: | SPTshxfot07 |
| Warranty: | 21 months |
| Manufacturer information |
SHX Trading s.r.o. , Hrusická 3, 141 00 Praha, [email protected], +420 725 359 870 
|