Thermofol H6-Wifi installation set 15 m2, 2250 W2

13,300,-

Thermofol H6-Wifi installation set 15 m2, 2250 W2

The Termofol underfloor heating mat consists of a system of wires laid on a special fibreglass mesh. The installation does not raise the floor level and provides a pleasant feeling of a warm floor, which further increases the comfort of any interior. A constant output of 150W/m² ensures optimal thermal parameters and the system itself is in no way dependent on the existing central heating installation, so it can be controlled independently. The ready-made H6-Wifi installation kit is ready for DIY installation.

Termofol H6-Wifi Installation Kit Heating Mat 0.5m², 75W

Key Features of the Termofol H6-Wifi Heating Mat Installation Kit, 15m², 2250W

  • Designed for interior underfloor heating
  • Suitable as both primary and supplementary heating
  • Fast floor heating
  • Independent of the central heating system
  • Can be controlled separately
  • Installation without raising the floor height
  • Construction with wires on a fibreglass mesh
  • Suitable for various types of flooring
  • Can be installed as a DIY project
  • Termofol TF-H6-Wifi thermostat

Heating mat application:
1. Cement screed
2. Heating mat
3. Adhesive for underfloor heating or self-levelling compound
4. Ceramic tiles / parquet / stone

Structural preparation and assembly:
The first step in laying the mat is to create a hole in the wall for 2 pipes to accommodate the power cable end and the sensor wire. A flush-mounted box Ø 60 for the installation of the temperature controller must also be placed in the wall. Then you can proceed to lay the system on the floor. For the underfloor heating mat to fulfil its purpose, it must be spread evenly over the entire floor area. It is particularly important to maintain the same spacing and to avoid downpipes, sewer drains, hot water installation elements or heating pipes. In the event of a fault and the need to replace these elements in the future, mechanical damage to the wires could occur. It is not advisable to lay the heating mat so that it passes between separate rooms, or under permanently built-in furniture or equipment. On the other hand, it is permissible to lay it under wall-hung sanitary ware or furniture on legs. The electrical wires must never be shortened. If the heating foil or heating mat under the panels, terracotta or flooring is too long and does not fit in the room, only cuts to the mesh may be made.

Specifications

Location

Location Pavement

Features

Cable type Two-wire
Heating power 2,250 W
Max. heating mat temperature 70 °C
Mat properties Self-adhesive surface
IP Code IPx7

Dimensions and weight

Width 50 cm
Flat 15 m2
Heating wire thickness 3.6 mm
Code:  TERMtoHO023
Warranty: 24 months