Thermofol H6 installation set 1 m2, 150 W
Thermofol H6 installation set 1 m2, 150 W
The Termofol underfloor heating mat consists of a system of wires laid on a special fibreglass mesh. The installation does not raise the floor level and ensures the pleasant feeling of a warm floor, which also increases the comfort of using any interior. A constant output of 150W/m² ensures optimal thermal parameters and the system itself is in no way dependent on the existing central heating installation, so it can be controlled independently. The H6 installation kit is ready for DIY installation.
Key Features of the Termofol H6 Underfloor Heating Mat Installation Kit, 1m², 150W
- Designed for interior underfloor heating
- Suitable as primary and supplementary heating
- Heats up the floor quickly
- Independent of the central heating system
- Can be controlled separately
- Installation without raising the floor level
- Construction with wires on a fibreglass mesh
- Suitable for various types of floor coverings
- Can be installed as a DIY project
Heating mat application:
1. Cement screed
2. Heating mat
3. Underfloor heating adhesive or self-levelling compound
4. Ceramic tiles/parquet/stone
Site preparation and installation:
The first step to laying the mat is to create an opening in the wall for 2 pipes to accommodate the end of the power cable and the sensor wire. A flush-mounted box (Ø60) must also be placed in the wall for the installation of the temperature controller. You can then proceed to laying the system on the floor. For the underfloor heating mat to fulfil its purpose, it needs to be spread evenly over the entire floor area. It is particularly important to maintain even spacing and avoid downpipes, drains, hot water installation elements or heating pipes. In the event of a malfunction and the need to replace these elements in the future, mechanical damage to the wires could occur. It is not advisable to lay the heating mat so that it runs between separate rooms or under permanently installed furniture or equipment. However, it is permissible to lay it under wall-mounted sanitary ware or furniture on legs. The electrical wires must never be shortened. If the heating foil or heating mat under the panels, terracotta or floor covering is too long and does not fit in the room, cuts can only be made in the mesh.
Specifications
Location
Features
Dimensions and weight
| Code: | TERMtoHO006 |
| Warranty: | 24 months |