Thermofol H6 installation set 3 m2, 450 W

4,760,-

Thermofol H6 installation set 3 m2, 450 W

The Termofol floor heating mat consists of a system of conductors laid on a special fibreglass mesh. Installation does not raise the floor level and provides the pleasant feeling of a warm floor, which enhances the comfort of any interior. A constant output of 150W/m² ensures optimal thermal performance, and the system itself is completely independent of the existing central heating installation, so it can be controlled as you wish. The H6 installation kit is ready for you to install yourself.

Termofol H6 installation kit heating mat 0.5 m², 75W

Key features of the Termofol H6 heating mat installation kit, 3m², 450W

  • Designed for interior floor heating
  • Suitable as both primary and supplementary heating
  • Heats the floor quickly
  • Independent of the central heating system
  • Can be controlled independently
  • Installation does not raise the floor height
  • Construction with conductors on a fibreglass mesh
  • Suitable for various types of floor coverings
  • Can be installed yourself

Heating mat application:
1. Cement screed
2. Heating mat
3. Adhesive for underfloor heating or self-levelling compound
4. Ceramic tiles / parquet / stone

Site preparation and installation:
The first step in laying the mat is to create a hole in the wall for 2 conduits, which will house the end of the power cable and the sensor wire. A Ø 60 flush-mounted box must also be placed in the wall for installing the temperature controller. You can then proceed to lay the system on the floor. For the floor heating mat to serve its purpose, it must be spread evenly over the entire floor area. It is particularly important to maintain equal spacing and to avoid downpipes, drains, hot water installation elements or heating pipes. In the event of a failure and the need to replace these elements in the future, the conductors could be mechanically damaged. The heating mat should not be laid so that it passes between separate rooms or under permanently installed furniture or equipment. However, it is acceptable to lay it under wall-hung sanitary ware or furniture on legs. The electrical conductors must never be shortened. If the heating film or heating mat under the panels, terracotta or flooring is too long and does not fit in the room, cuts may only be made to the mesh.

Specifications

Location

Location Pavement

Features

Cable type Two-wire
Heating power 450 W
Max. heating mat temperature 70 °C
Mat properties Self-adhesive surface
IP Code IPx7

Dimensions and weight

Width 50 cm
Flat 3 m2
Heating wire thickness 3.6 mm
Code:  TERMtoHO011
Warranty: 24 months