Thermofol H6 installation set 7 m2, 1050 W
Thermofol H6 installation set 7 m2, 1050 W
The Termofol underfloor heating mat consists of a system of wires laid on a special fibreglass mesh. The installation does not raise the floor level and provides the pleasant feeling of a warm floor, which also increases the comfort of any interior. A constant output of 150W/m² ensures optimal thermal parameters, and the system itself is not in any way dependent on the existing central heating installation, so it can be controlled freely. The H6 installation kit is ready for DIY installation.
Key Features of the Termofol H6 Heating Mat Installation Kit, 7m², 1050W
- Designed for indoor underfloor heating
- Suitable as a main or supplementary heating source
- Heats the floor quickly
- Independent of the central heating system
- Can be controlled separately
- Installation does not raise the floor height
- Construction with wires on a fibreglass mesh
- Suitable for various types of floor coverings
- Can be installed as a DIY project
Heating mat application:
1. Cement screed
2. Heating mat
3. Adhesive for underfloor heating or self-levelling compound
4. Ceramic tiles / parquet / stone
Structural preparation and assembly:
The first step in laying the mat is to create a hole in the wall for two pipes to house the end of the power cable and the sensor wire. A flush-mounted box (Ø 60) for the temperature controller must also be placed in the wall. Then, the system can be laid on the floor. For the underfloor heating mat to fulfil its purpose, it must be spread evenly over the entire floor area. It is particularly important to maintain equal spacing and to avoid downpipes, drainpipes, hot water installation elements, or heating pipes. If these elements fail and need to be replaced in the future, the wires could be mechanically damaged. The heating mat should not be laid so that it runs between separate rooms, or under permanently installed furniture or equipment. However, it can be laid under wall-mounted sanitary ware or furniture on legs. The electrical wires must never be shortened. If the heating foil or heating mat under the panels, terracotta, or flooring is too long and does not fit in the room, cuts can only be made in the mesh.
Specifications
Location
Features
Dimensions and weight
| Code: | TERMtoHO016 |
| Warranty: | 24 months |