Thermofol H6-Wifi installation set 2,5 m2, 375 W

5,185,-

Thermofol H6-Wifi installation set 2,5 m2, 375 W

The Termofol underfloor heating mat consists of a system of conductors laid on a special fibreglass mesh. The installation does not raise the floor level and provides the pleasant feeling of a warm floor, which also increases the comfort of any interior. A constant output of 150W/m² ensures optimal thermal parameters, and the system itself is in no way dependent on the existing central heating installation, so it can be controlled independently. The H6-Wifi ready-made installation kit is designed for DIY installation.

Termofol H6-Wifi Installation Kit 0.5m², 75W

Key Features of the Termofol H6-Wifi Heating Mat Installation Kit, 2.5m², 375W

  • Designed for interior underfloor heating
  • Suitable as both main and supplementary heating
  • Heats the floor quickly
  • Independent of the central heating system
  • Can be controlled independently
  • Installation without raising the floor height
  • Construction with conductors on a fibreglass mesh
  • Suitable for various types of floor coverings
  • Can be installed as a DIY project
  • Termofol TF-H6-Wifi thermostat

Heating mat application:
1. Cement screed
2. Heating mat
3. Adhesive for underfloor heating or self-levelling compound
4. Ceramic tiles / parquet / stone

Site preparation and installation:
The first step in laying the mat is to create a hole in the wall for two pipes to accommodate the power cable end and the sensor wire. A flush-mounted box (Ø 60) must also be placed in the wall to install the temperature controller. Then you can proceed with laying the system on the floor. For the underfloor heating mat to fulfil its purpose, it must be spread evenly over the entire floor area. It is particularly important to maintain equal spacing and to avoid downpipes, sewer drains, hot water installation elements, or heating pipes. If these components fail and need to be replaced in the future, the conductors could be mechanically damaged. The heating mat should not be laid so that it passes between separate rooms, nor under permanently installed furniture or equipment. However, it is permissible to lay it under wall-hung sanitary ware or furniture on legs. The electrical conductors must never be shortened. If the heating foil or heating mat under the panels, terracotta, or floor covering is too long and does not fit in the room, cuts can only be made in the mesh.

Specifications

Location

Location Pavement

Features

Cable type Two-wire
Heating power 375 W
Max. heating mat temperature 70 °C
Mat properties Self-adhesive surface
IP Code IPx7

Dimensions and weight

Width 50 cm
Flat 2.5 m2
Heating wire thickness 3.6 mm
Code:  TERMtoHO025
Warranty: 24 months