Auriga Quick Easy Kit

The Klima Auriga Quick model is for B-D series rocket engines. The Auriga Quick model parts are easily connected to the rocket tube and comes with a parachute for a safe landing. The Auriga Quick is almost 900 mm in size, the rocket is 3 engines. All plastic parts are made of highly durable ABS. Bracket for 3 motors is included. It flies up to 420 m. Although it is a large rocket with a diameter of 50 mm, its assembly is simple. The finished stabilizer part is simply slipped onto the rocket body, the motor mount assembly is slid into the bottom part and the head is fitted on top. For the launch of a model rocket equipped with multiple engines, it is recommended to use a Lightning Bolt with Pyrolepa to ensure synchronous ignition of the engines. It is recommended to launch the rocket on a ramp with a wire diameter of 6 mm. There is a sophisticated baffle system in the rocket fuselage to protect the parachute during ejection (no need to use an ejection seal). The parachute is made of Ripstop-Nylon and is included in the package. Easy to assemble rocket, takes approximately 1 hour.

E2X rocket construction requirements

The model rocket does not need to be painted and no special tools are needed to assemble it. All parts are painted and ready. It is necessary to glue or assemble the rocket, glue the prints and it is ready to fly. It takes approximately one hour to build the rocket.

Phases of flight

1. Engine ignition - the burner ignites the fuel mixture in the engine. The desired direction of flight is ensured by the guide rod of the launch pad on which the rocket is mounted.
2. Thrust and acceleration - the rocket is propelled by the reactive power of the rocket engine.
3. Burning out of the propellant mixture - once the propellant mixture burns out, the delay mixture begins to burn, producing a large amount of smoke. This is used to track the flight of the rocket. The fast-moving rocket is now beginning to slow down.
4. Top of flight and ejection - after the delay mixture burns out, the ejection mixture is ignited, which activates the rocket's reentry system.
5. The return system - is most often implemented by means of a parachute, ribbon, or so-called. heli-blade.

Package contents:
2 tubes (to build full size), plastic spike, stabilizers, engine mount, parachute, decals, instructions CZ, Manual EN, DE, FR, IT, SP.
Achievable height:
400 m
Recommended engines:
3× B4-4 (88 m / first flight)
2× C6-5 + 1× C6-P (225 m)
2× D9-5 + 1× D9-P (420 m)
Diameter of the ramp guide bar:
6 mm
Length:
895 mm
Average:
50 mm
Weight:
250 g