Traxxas 4-Tec 2.0 1:10 VX3 RTR chassis

Traxxas 4-Tec 2.0 1:10 VX3 RTR chassis
The Traxxas 4-Tec 2.0 1:10 VX3 RTR chassis is designed for fitting your own body shell. Thanks to standard on-road chassis dimensions, an adjustable wheelbase and adjustable mounts, you can fit it with a wide range of bodies from various manufacturers, ready-made or clear bodies that you can paint yourself. The model then handles driving on car parks, asphalt roads and other flat surfaces, turning them into a race track. It stands out with a fun drive full of acceleration, precise steering and speed, reaching speeds of up to 80km/h. TSM electronic stability control helps you steer like a pro even at high speeds. The design is built on a proven foundation, including a modular chassis design, independent suspension geometry and a 4×4 drivetrain. The chassis uses a classic body mount with adjustable posts secured with clips. Run the model with a 2S or 3S LiPo battery. Children and beginners should start with a 2S battery, which reduces the maximum speed by 30%. The speed controller offers 3 driving modes, including a Training mode that limits power to 50%. Take control with the TQi Sport 2.4GHz RC system. Customise and maintain your Traxxas model with option parts and a full range of spare parts.
Key features of the Traxxas 4-Tec 2.0 1:10 VX3 RTR chassis
- Designed for fitting your own body shell
- Standard on-road dimensions, adjustable wheelbase and adjustable mounts allow you to fit a wide range of clear or pre-painted bodies from various manufacturers
- Delivers an exciting drive full of acceleration, precise steering and speed
- Reaches speeds of up to 80km/h
- Up to 30 minutes of runtime on a single charge
- TSM electronic stability control helps with steering
- TQi Sport 2.4GHz RC system provides precise control
- Compatible with a wide range of option parts and spare parts
Traxxas 4-Tec 2.0 1:10 VX3 RTR chassis offers advanced components
The Traxxas 4-Tec 2.0 1:10 VX3 RTR chassis features a VX3 brushless power system that converts the energy of a 3S LiPo battery into extreme acceleration and speed. The VX3 speed controller offers advanced electronics, a massive passive heatsink, easy one-button setup and telemetry support. The powerful Velineon V3300 motor stays cool even during demanding runs thanks to its integrated cooling. A metal-gear servo guarantees high strength and durability, with a servo saver installed in the steering linkage to protect the gears from impacts. The chassis features 4×4 all-wheel drive, equipped with a central driveshaft, two differentials and durable steel driveshafts. Replica brake discs with red calipers complete the scale look. The TQi Sport transmitter provides the excellent range and reliability of the TQi system in a compact and ergonomic design. Simple operation and single-button programming make it quick and intuitive to use. The powerful 2.4GHz system guarantees a stable connection, long range and precise control, keeping the model under command even at high speeds.
Traxxas chassis features a moulded composite tub
The Traxxas 4-Tec 2.0 chassis is formed of a moulded composite tub that is lightweight yet rigid. The modular design connects the front and rear sections of the chassis with the central tub into one solid platform, which distributes impact energy while allowing easy maintenance. The smooth, flat chassis bottom eliminates aerodynamic drag and slides smoothly over uneven surfaces without snagging. The front bumper has an angled design, helping the model overcome obstacles like expansion joints.
Overcomes all bumps
The dual-bellcrank steering system ensures smooth linkage movement to the wheels and reduces bump steer. A servo saver integrated into the servo horn protects the steering linkage from impacts. An innovative battery hold-down securely holds the battery in place with a pivoting latch, making battery changes easy. The Traxxas 4-Tec 2.0 1:10 VX3 RTR chassis effectively absorbs all bumps thanks to oil-filled shocks with X-rings that seal perfectly. The shocks are fully adjustable, allowing you to change spring preload with spacers, and tune compression and rebound by changing the shock oil viscosity. The chassis features a waterproof design with several patented elements, such as a sealed receiver box, waterproof servo and epoxy-potted electronics in the speed controller, eliminating the risk of water damage.
4-Tec 2.0 chassis adapts to different bodies
The Traxxas 4-Tec 2.0 1:10 VX3 RTR chassis lets you extend or shorten the wheelbase by up to 3mm, making it easy to adapt to different bodies. Make the adjustment by removing the rear suspension arms and removing material from their front or rear. The cut-off part is then used as a spacer on the opposite side of the arm, or it can be replaced with suitable washers. The steering blocks of the 4-Tec 2.0 chassis allow for a wider steering angle when maximum steering throw is desired. Simply trim the plastic stop to increase steering travel, then drill out the inner hole on the steering arm and relocate the steering linkage. The 4-Tec 2.0 chassis offers two different mounting positions for the rear upper links to accommodate bodies of different heights. Multiple shock mounting positions also let you tune suspension performance to suit different conditions. For driving on uneven surfaces, a softer setup with more suspension travel and higher ride height is best. For asphalt or a race track, a lower ride height and stiffer, more progressive shock setup is ideal.
Corners with confidence
A rigid motor mounting system with pre-drilled holes based on the gear ratio takes the guesswork out of setting the correct gear mesh. The gears always mesh perfectly with maximum efficiency and a long service life. Power is distributed between the axles via a one-piece steel driveshaft that easily handles brushless motor power. Front and rear differentials ensure optimal power distribution. You can tune differential action by changing the oil viscosity. The Traxxas 4-Tec 2.0 1:10 VX3 RTR chassis is equipped with one-piece steel driveshafts that save weight and transfer power directly to the wheels with instant response. Large ball bearings throughout the drivetrain ensure smooth operation, featuring rubber seals to keep dirt out. The chassis also features detailed replica brakes, including mock discs with red calipers. Black chrome 5-spoke wheels add a modern look, while high-grip street tyres guarantee excellent traction and cornering confidence. Adjustable body mounts accommodate 200mm bodies, with posts that slide forward, backward and sideways to fit most body shell mounting holes.
Steering controlled by Traxxas 2057 digital servo
Steering is handled by the Traxxas 2057 digital servo, which features dual ball bearings on the output shaft and metal gears. Its waterproof construction ensures reliable performance. The model is powered by the Velineon V3300 brushless motor, which features cooling vents and an internal cooling fan on the shaft that pulls air through the motor to reduce temperatures and maintain consistent performance. A metal housing further dissipates heat. The waterproof VX3 electronic brushless speed controller features advanced electronics and supports 2-3S LiPo batteries. It supports telemetry and offers 3 driving profiles. Sport mode allows forward, brake and reverse. Race mode is ideal for competition with forward and brake only, while Training mode is perfect for children and beginners, limiting power to 50% for forward, reverse and braking.
Traxxas model is controlled with a pistol grip transmitter
The Traxxas TQi Sport 2.4GHz three-channel receiver ensures reliable control without signal loss. It pairs easily with a single button. It features 3-axis MEMS sensors to detect position and movement, with an LED providing status info. The model is controlled with a 2-channel proportional pistol grip Traxxas TQi Sport transmitter operating on the 2.4GHz band. It is powered by 4 AA batteries, with their status indicated by an LED. It features a steering trim knob and a button for adjusting channel reversing, end points, TSM and model type, complete with a foam steering wheel and a removable grip for smaller hands.
Traxxas Stability Management lets you corner at high speeds
The Traxxas Stability Management system lets you experience maximum power, speed and acceleration, corner at high speeds, and enjoy easier control on slippery surfaces such as dust, smooth concrete, ice and snow. The receiver features a 3-axis MEMS gyro and accelerometer that evaluates the RC model's movement 100 times per second and makes subtle steering corrections to adjust its heading. Traxxas Stability Management does not limit motor power, and you can easily adjust or turn it off using the TQi Sport transmitter.
Features and technical specifications
- High-quality 4-Tec 2.0 on-road chassis
- 4WD all-wheel drive
- Modular chassis design for easy servicing
- Flat chassis with a low centre of gravity
- Precise steering mechanics
- Adjustable suspension geometry
- Battery compartment with a latch system for easy replacement
- Front and rear sealed differentials
- One-piece centre driveshaft
- Oil-filled dampers with X-rings
- Steel driveshafts
- On-road tyres, wheels and replica brakes
- Versatile adjustable body posts
- Waterproof steering servo with metal gears
- V3300 brushless motor with integrated cooling
- Waterproof VX3 speed controller with telemetry support
- Traxxas TQi Sport 2.4GHz RC system
- TSM electronic stability control
- Dimensions 37.9×20×6.2cm
Package contents
- Assembled chassis of the Traxxas 4-Tec 2.0 VX3 RTR RC model
Specifications
Age and intended use
RC model type
Scale
Features
Advanced
Control type
Dimensions
Included
Model power supply
Controller power supply
Battery
| Code: | HRAtra063 |
| Warranty: | 24 months |
| Links: | Producer's Website: |
| Manufacturer information |
ASTRA, spol. s r.o., Prakšická 2589, 688 01 Uherský Brod, +420 572 619 619, [email protected]
|