Ubiquiti UniFi Device Bridge Pro
Ubiquiti UniFi Device Bridge Pro
This 5 GHz wireless bridge allows point-to-point connectivity over a distance of around 5 km to another UDB-Pro device or seamless uplink using the UniFi Wi-Fi Auto-Link feature. It has two GbE RJ-45 ports, one of which supports PoE output to power other PoE devices. The device is powered via PoE/PoE+ and is designed for outdoor installations with weatherproof (IPX6). The device cannot be set up separately and must be managed using the UniFi console, official UniFi hosting, or a self-hosted UniFi Network Server.
Key Features of the Ubiquiti UniFi Device Bridge Pro
- Support for point-to-point connectivity
- Uplink capability with UniFi Wi-Fi Auto-Link
- 2 Gigabit Ethernet ports (PoE+ input required for PoE pass-through, 30W injector)
- PoE/PoE+ power supply (PoE adapter included)
- Maximum transmission speed 867 Mbps in the 5 GHz band
- Integrated 2x2 MIMO antenna with 19 dBi gain
- Weatherproof (IPX6), suitable for outdoor installation
- Can be mounted on a pole (mounting adapter included)
- Supports 802.11a/n/ac Wi-Fi standards with WPA2 AES security
Package contents:
Device, power cable, mounting accessories, PoE injector 48 V / 0.32 A
Technical Specifications:
Dimensions: 189.5 × 64.3 mm
Weight without holder: 431 g
Weight with holder: 515 g
Housing material: UV resistant polycarbonate
Mounting material: UV stabilised polycarbonate, stainless steel
Diameter of attachment to the bar: 20-53.1 mm (outer diameter of pipe)
Wind load: 69 N at 200 km/h
Weather resistance: IPX6
Network interface: 2× GbE RJ45 port
Management Interface: Ethernet, Wi-Fi
PoE interface: 1× PoE input, 1× passive PoE output
Power supply: UniFi PoE switch, 48 V 0.32 A PoE adapter (included)
Supported voltage range: 42.5-57 V DC
Maximum power consumption: 9 W
Maximum TX performance: 25 dBm (5 GHz)
OUTSIDE: 2×2 (5 GHz)
Maximum data rate: 867 Mbps (5 GHz, BW80)
Antenna gain: 19 dBi (5 GHz)
Antenna: Inside
Range: 5+ km
LED indication: power, Ethernet, 4× signal strength
Button: factory reset
Assembly: on a stick
Operating temperature: -40 to 60 °C
Operating humidity: 5 to 95 % (non-condensing)
Wi-Fi standards: 802.11a/n/ac
Wireless security: WPA2 AES (always active)
Operating frequency USA/CA: 5150-5850 MHz (U-NII-1 to U-NII-3)
Operating frequency worldwide: 5150-5875 MHz
Channel bandwidth: 20/40/80 MHz
Maximum conducted TX power: 25 dBm
Specifications
Standards and frequency
Functions
Speed
Type
Security
Connectors
Antenna features
Dimensions and weight
PoE charging
| Code: | Ubiq25010 |
| Warranty: | 24 months |
| Links: | Producer's Website: |
| Manufacturer information |
Ubiquiti International Holding B.V., Ekkersrijt 3102. Son en Breugel, 5692 CC. Netherlands, [email protected] 
|