Vortice VORT HRW 40 MONO EVO mini
Vortice VORT HRW 40 MONO EVO mini
Decentralized heat recovery unit Vortice VORT HRW 40 MONO EVO HCS is designed for installation in residential and commercial areas of new buildings or buildings undergoing renovation to increase energy efficiency. Ideal not only for ensuring proper air exchange, but also for preventing excessive humidity in the room and the formation of mould on the walls. Includes G3 filter, ceramic heat exchanger and external plastic grille with insect screen.
Key features of the recuperation unit Vortice VORT HRW 40 MONO EVO HCS
- Constructed of impact-resistant and UV-resistant plastic resin.
- Ceramic heat exchanger with hexagonal cells - high heat exchange efficiency (up to 90% with minimum air flow)
- Fan with high efficiency EC motor
- Five operating speeds to maximize performance when needed or to minimize noise and power consumption
- Controls on the unit for switching the unit on and off, setting the operating mode and selecting the fan speed
- Two air filters, one IsoCoarse 65% and one dust pre-filter, both easily removable for washing
- LED filter status light located at the bottom of the chassis, immediately behind the front cover
- Mechanical rapid air shut-off system integrated into the product chassis
- The outer rubber grille can be installed from the outside with dowels or from the inside through a hole in the wall
- Insect screen that can be installed in the pipe from the inside
- Connection of remote C-TEMP and C-HCS sensors for automatic operation control
Three different operating modes
Continuous heat recovery ventilation:the product cycles the air in and out of the room and recovers the energy stored in the heat exchanger
Ventilation with exhaust air only: Exhaled air is extracted from the room
Ventilation with supply air only: the product brings fresh air into the room
Whole description
Specifications
Colour
Colour
White
Assembly
Placement
Wall-mounted
Minimum wall thickness
283 mm
Maximum wall thickness
700 mm
Efficiency
Efficiency
89 %
Minimum air flow
15 m3/h
Maximum air flow
40 m3/h
Features
Sensor
Humidity, temperature, Illumination intensity settings
Heat exchanger material
Ceramics
Filter classification
G3
Minimum operating temperature
-20 °C
Maximum operating temperature
50 °C
Minimum Noise
36.5 dB(A)
Maximum loudness
49.3 dB(A)
Control
Control
Manual
Dimensions
Diameter
146 mm
Installation hole
160 mm
Length
35.6 cm
Weight
3.3 kg
All parameters
| Code: | Vorrek004 |
| Warranty: | 24 months |
| Links: | Producer's Website: |