XILENCE fan 80 × 80 × 25 mm, DMI, PWM, Performance C series
XILENCE fan 80 × 80 × 25 mm, DMI, PWM, Performance C series
The XILENCE Performance C PC fan with PWM actively removes warm air from the computer case, helping to cool its components. Its design aims for a balance between cooling performance, low noise, and affordability. It connects to the motherboard using a 4-pin connector, which uses a PWM signal to automatically adjust the rotation speed based on the current system load. The fan operates within a voltage range of 6V to 13.8V, which ensures a reliable start-up and stable operation. Fluid dynamic bearings reduce friction and component wear, contributing to its quiet operation.
Key features of the XILENCE Performance C 80×80×25mm PC fan with PWM
- Fluid dynamic bearing reduces operating noise
- Rotational speed ranges from 800 to 1800rpm
- Maximum noise level of 20dB
- Airflow of 37.04m³/h
- Connects using a 4-pin PWM connector
- Rotor blades support efficient airflow
Quiet operation with fluid dynamic bearings
Inside the fan, Fluid Dynamic Bearings (FDB) keep operational noise and vibrations to a minimum. This type of bearing uses a thin layer of oil to create pressure between moving parts, which prevents direct contact between metal surfaces and reduces their wear. The FDB technology also helps to stabilise the rotor and extends the fan's lifespan. The result is consistent and quiet operation, with a noise level not exceeding 20dB even at higher speeds.
Optimised airflow
The design of the rotor blades promotes efficient air movement. The special shaping and angle of the blades direct the airflow with low resistance and suppress the creation of turbulence, which increases noise levels. As a result, the fan provides an airflow of up to 37.04m³/h, supporting cooling efficiency even in smaller computer builds or in spaces with limited flow. This performance is sufficient for dissipating heat from fanless coolers or for enhancing the overall airflow in the case.
Fan connection
Connecting via the 4-pin PWM connector entrusts fan speed control to the motherboard. The speed changes smoothly across a wide range, from 800 to 1800rpm, according to the current temperature of the processor or other monitored components. The system thus maintains optimal operating temperatures without unnecessary noise when full cooling power is not needed. During low load, the fan slows down to an inaudible level. The 440mm long cable provides enough flexibility for routing and connection even in larger cases.
Bearing type:
Fluid Dynamic Bearing (FDB)
Speed range:
800–1800RPM
Airflow:
37.04m³/h
Maximum noise level:
20dB
Power connector:
4-pin PWM
Weight:
65g
Dimensions:
80×80×25mm
Cable length:
440mm
Specifications
Fan speed
Technical specification
Dimensions
Pack
Connectors
Weight
| Code: | XILchl019 |
| Warranty: | 24 months |